Hostname: page-component-7bb8b95d7b-dtkg6 Total loading time: 0 Render date: 2024-09-26T18:34:25.742Z Has data issue: false hasContentIssue false
  • English
  • Français

Binding Mechanisms of As(III) on Activated Carbon/Titanium Dioxide Nanocomposites: A potential method for arsenic removal from water

Published online by Cambridge University Press:  16 May 2012

Z. Özlem Kocabaş ,
Burcu Açıksöz  and
Yuda Yürüm
Z. Özlem Kocabaş
Affiliation:
Faculty of Natural Science and Engineering, Sabanci University, Orhanlı 34956 Tuzla, Istanbul/Turkey
Burcu Açıksöz
Affiliation:
Faculty of Natural Science and Engineering, Sabanci University, Orhanlı 34956 Tuzla, Istanbul/Turkey
Yuda Yürüm
Affiliation:
Faculty of Natural Science and Engineering, Sabanci University, Orhanlı 34956 Tuzla, Istanbul/Turkey
Get access

Abstract

Novel nanocomposite materials where titanium dioxide nanoparticles were inserted into the walls of a macroporous activated carbon were produced and their efficiency for the removal of As(III) from water was compared with pure activated carbon and titanium dioxide nanoparticles. The nanocomposites were synthesized with different molar ratios by using sol-gel method and were characterized by x-ray diffraction (XRD) and scanning electron microscopy (SEM). The nanocomposite system showed excellent capability for the removal of As(III) ions from water by considering feasibility, efficiency and cost. The maximum As(III) removal percentages were ∼4.7% at pH 8 for activated carbon, ∼38 % for titanium dioxide at pH 6, and ∼98 % at pH 7 for activated carbon/titanium dioxide (AC/TiO2) nanocomposite, respectively. According to kinetic sorption data, the higher regression coefficients (R2) were obtained after the application of pseudo-second order to the experimental adsorption data for all adsorbent materials. The equilibrium data were modeled with the help of Langmuir and Freundlich equations. Overall, the data are well fitted with both the models, with a slight advantage for Langmuir model. The maximum arsenic uptake (qmax) value computed from slope of the linearized Langmuir plot was 26.62 mg/g for the adsorption of As(III) onto AC/TiO2 nanocomposite.

Keywords

absorbentadsorptionsol-gel
Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 1449: Symposium BB – Solution Synthesis of Inorganic Films and Nanostructured Materials , 2012 , mrss12-1449-bb04-07
Copyright
Copyright © Materials Research Society 2012

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Lin, S.H. and Juang, R.S., J. Hazard. Mater. 92, 3 (2002).Google Scholar
2. Mohan, D., Pittman, C.U., J Hazard Mater. 142, (2007).Google Scholar
3. Shevade, S., Ford, R.G., Water Res. 38, (2004).Google Scholar
4. Berg, M., Tran, H.C., Nguyen, T.C., Pham, H.V., Schertenleib, R., Giger, W., Environ Sci Technol. 35, (2001).Google Scholar
5. Chiou, H.Y., Hsueh, Y.M., Liaw, K.F., Horng, S.F., Chiang, M.H., Pa, Y.S., Lin, J.S.N., Huang, C.H., Chen, C.J., Cancer Res. 55, (1995).Google Scholar
6. Habuda-Stanic, M., Kalajdzic, B., Kules, M., Velic, N., Desalination 229 (2008).Google Scholar
7. Bellobono, I.R., Carrara, A., Barni, B., and Gazzotti, A., J. Photoc. Photobio. A. 84, 1 (1994).Google Scholar
8. Qu, D., Wang, J., Hou, D.Y., Luan, Z.K., Fan, B., Zhao, C.W., J Hazard Mater. 163 (2009).Google Scholar
9. Kannan, N. and Sundaram, M.M., Dyes Pigm. 51, 1 (2001).Google Scholar
10. Langmuir, I., J. Am. Chem. Soc. 40, 9 (1918).Google Scholar
11. Hasany, S.M., Saeed, M.M., and Ahmed, M., J. Radioanal Nucl. Ch. 252, 477 (2002).Google Scholar