Hostname: page-component-8448b6f56d-jr42d Total loading time: 0 Render date: 2024-04-23T18:55:36.410Z Has data issue: false hasContentIssue false

Carbon Nanotube Free-Standing Film of Pt/MWNTs as a Bifunctional Component in Hydrogen Proton Exchange Membrane Fuel Cells

Published online by Cambridge University Press:  01 February 2011

Jason M. Tang
Affiliation:
jtang@engr.ucr.edu, University of California, Riverside, Department of Chemistry, Riverside, CA, 92521, United States
Kurt Jensen
Affiliation:
kjens001@student.ucr.edu, University of California, Riverside, Department of Chemical & Environmental Engineering, Riverside, CA, 92521, United States
Paul Larsen
Affiliation:
paul.larsen@email.ucr.edu, University of California, Riverside, Department of Chemical & Environmental Engineering, Riverside, CA, 92521, United States
Wenzhen Li
Affiliation:
liwenzhen@gmail.com, University of California, Riverside, Department of Chemical & Environmental Engineering, Riverside, CA, 92521, United States
Mikhail E. Itkis
Affiliation:
mitkis@engr.ucr.edu, University of California, Riverside, Center for Nanoscale Science and Engineering, Riverside, CA, 92521, United States
Yushan Yan
Affiliation:
yushan.yan@ucr.edu, University of California, Riverside, Department of Chemical & Environmental Engineering, Riverside, CA, 92521, United States
Robert C. Haddon
Affiliation:
haddon@ucr.edu, University of California, Riverside, Department of Chemistry, Pierce Hall Annex 203, University of California, Riverside, Riverside, CA, 92521, United States, 951-827-2044, 951-827-4713
Get access

Abstract

Conventional fuel cell architecture on one side of the membrane electrode assembly consists of a carbon backing layer, hydrophobic microporous layer (MPL), and a catalyst layer, which is in contact with the solid proton exchange membrane. Pt nanoparticles are deposited onto multi-walled carbon nanotubes (Pt/MWNTs) and a free-standing film of Pt/MWNTs is fabricated to act as the MPL and the catalyst layer in hydrogen fuel cells. The free-standing film of Pt/MWNTs condenses two functions into one bifunctional layer that simplifies the fuel cell fabrication procedure. Fuel cell polarization performance improves when using the free-standing film of Pt/MWNTs without the MPL resulting in a higher peak performance of 1.2 W/cm2 in comparison with 1.0 W/cm2 when in the presence of a MPL.

Type
Research Article
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Ismagilov, Z. R.; Kerzhentsev, M. A.; Shikina, N. V.; Lisitsyn, A. S.; Okhlopkova, L. B.; Barnakov, C. N.; Sakashita, M.; Iijima, T.; Tadokoro, K. Catalysis Today 2005, 102–103, 58.Google Scholar
2. Wee, J.-H.; Lee, K.-Y.; Kim, S. H. Journal of Power Sources 2007, 165, 667.Google Scholar
3. Wang, X.; Li, W.; Chen, Z.; Waje, M.; Yan, Y. Journal of Power Sources 2006, 158, 154.Google Scholar
4. Kongkanand, A.; Kuwabata, S.; Girishkumar, G.; Kamat, P. Langmuir 2006, 22, 2392.Google Scholar
5. Park, S.; Lee, J.-W.; Popov, B. N. Journal of Power Sources 2006, 163, 357.Google Scholar
6. Li, W.; Liang, C.; Qiu, J.; Zhou, W.; Han, H.; Wei, Z.; Sun, G.; Xin, Q. Carbon 2002, 40, 791.Google Scholar
7. Li, W.; Liang, C.; Zhou, W.; Qiu, J.; Li, H.; Sun, G.; Xin, Q. Carbon 2004, 42, 436.Google Scholar
8. Li, W.; Liang, C.; Zhou, W.; Qiu, J.; Zhou, Z.; Sun, G.; Xin, Q. J. Phys. Chem. B 2003, 107, 6292.Google Scholar
9. Li, W.; Wang, X.; Chen, Z.; Waje, M.; Yan, Y. Langmuir 2005, 21, 9386.Google Scholar
10. Kocha S., S. Chapter 43: Principles of MEA preparation. In Handbook of Fuel Cells-Fundamentals, Technology, and Applications; Vielstich, W., Gasteiger H., A., Lamm, A., Eds.; John Wiley & Sons Ltd.: Chichester, 2003; Vol. 3; pp 538.Google Scholar