Hostname: page-component-76fb5796d-wq484 Total loading time: 0 Render date: 2024-04-26T01:07:17.998Z Has data issue: false hasContentIssue false
  • English
  • Français

CMOS-Compatible Through Silicon Vias for 3D Process Integration

Published online by Cambridge University Press:  26 February 2011

Cornelia K. Tsang ,
Paul S. Andry ,
Edmund J. Sprogis ,
Chirag S. Patel ,
Bucknell C. Webb ,
Dennis G. Manzer  and
John U. Knickerbocker
Cornelia K. Tsang
Affiliation:
cktsang@us.ibm.com, IBM T.J. Watson Research Center, System-on-Package (SOP), 1101 Kitchawan Road, Rte 134 / PO Box 218, Yorktown Heights, NY, 10598, United States, 914-945-1398
Paul S. Andry
Affiliation:
andry@us.ibm.com, IBM T.J. Watson Research Center, 1101 Kitchawan Road, Yorktown Heights, NY, 10598, United States
Edmund J. Sprogis
Affiliation:
u6474@us.ibm.com, IBM Systems and Technology Group, 1000 River Street, Essex Junction, VT, 05452, United States
Chirag S. Patel
Affiliation:
pchirag@us.ibm.com, IBM T.J. Watson Research Center, 1101 Kitchawan Road, Yorktown Heights, NY, 10598, United States
Bucknell C. Webb
Affiliation:
bcwebb@us.ibm.com, IBM T.J. Watson Research Center, 1101 Kitchawan Road, Yorktown Heights, NY, 10598, United States
Dennis G. Manzer
Affiliation:
manzer@us.ibm.com, IBM T.J. Watson Research Center, 1101 Kitchawan Road, Yorktown Heights, NY, 10598, United States
John U. Knickerbocker
Affiliation:
knickerj@us.ibm.com, IBM T.J. Watson Research Center, 1101 Kitchawan Road, Yorktown Heights, NY, 10598, United States
Get access

Abstract

As the limits of traditional CMOS scaling are approached, process integration has become increasingly difficult and resulting in a diminished rate of performance improvement over time. Consequently, the search for new two- and three- dimensional sub-system solutions has been pursued. One such solution is a silicon carrier-based System-on-Package (SOP) that enables high-density interconnection of heterogeneous die beyond current first level packaging densities. Silicon carrier packaging contains through silicon vias (TSV), fine pitch Cu wiring and high-density solder pads/joins, all of which are compatible with traditional semiconductor methods and tools. These same technology elements, especially the through silicon via process, also enable three dimensional stacking and integration. An approach to fabricating electrical through-vias in silicon is described, featuring annular-shaped vias instead of the more conventional cylindrical via. This difference enables large-area, uniform arrays to be produced with high yield as it is simpler to integrate into a conventional CMOS back-end-of-line (BEOL) process flow. Furthermore, the CTE-matched silicon core provides improved mechanical stability and the dimensions of the annular via allows for metallization by various means including copper electroplating or CVD tungsten deposition. An annular metal conductor process flow will be described. Through-via resistance measurements of 50, 90, and 150μm deep tungsten-filled annular vias will be compared. Two silicon carrier test vehicle designs, containing more than 2,200 and 9,600 electrical through-vias, respectively, were built to determine process yield and uniformity of via resistance. Through silicon via resistances range from 15-40 mΩ, and yields in excess of 99.99% have been demonstrated.

Keywords

packagingmicroelectronicsmetallic conductor
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 970: Symposium Y – Enabling Technologies for 3-D Integration , 2006 , 0970-Y01-01
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Tsang, C.K. and Topol, A.W., “3D Integrated Circuits and Silicon Carrier Packaging Realization,” Proceedings of the 23rd VLSI VMIC Conference, Fremont, CA, 2006, pp. 61–69.Google Scholar
2. http://www.itrs.net/home.htmlGoogle Scholar
3. Takahashi, K. et al., “Process Integration of 3D Chip Stack with Vertical Interconnection,” Proceedings of the 54th Electronic Components and Technology Conference, Las Vegas, NV, 2004, pp. 601–609.Google Scholar
4. Ramm, P. et al., “3D System integration Technologies,” Materials Research Society Symposium Proceedings, San Francisco, CA, 2003, pp. 3–14.Google Scholar
5. Klumpp, A. et al., “Chip-to-Wafer Stacking Technology for 3D System Integration,” Proceedings of the 53rd Electronic Components and Technology Conference, New Orleans, LA, 2003, pp. 1080–1083.Google Scholar
6. Khan, N. et al., “Development of 3D Stacked Package Using Silicon Interposer for High Power Application,” Proceedings of the 56th Electronic Components and Technology Conference, San Diego, CA, 2006, pp. 756–760.Google Scholar
7. Kunio, T. et al., “Three-dimensional Shared Memory Fabricated Using Wafer Stacking Technology,” IEDM Technical Digest, 2000, pp. 165–168.Google Scholar
8. Topol, A.W. et al., “Three-dimensional Integrated Circuits,” IBM J. Res. & Dev., 50 (4/5), 2006, pp. 491–506.Google Scholar
9. Bower, C.A. et al., “High Density Vertical Interconnects for 3D Integration of Silicon Integrated Circuits,” Proceedings of the 56th Electronic Components and Technology Conference, San Diego, CA, 2006, pp. 399–403.Google Scholar
10. Patel, C.S. et al., “Silicon Carrier with Deep Through Vias, Fine Pitch Wiring and Through Cavity for Parallel Optical Transceiver,” Proceedings of the 55th Electronic Components and Technology Conf, Lake Buena Vista, FL, 2005, pp. 1318–1324.Google Scholar
11. Andry, P.S. et al., “A CMOS-compatible Process for Fabricating Electrical Through-vias in Silicon,” Proceedings of the 56th Electronic Components and Technology Conference, San Diego, CA, 2006, pp. 831–837.Google Scholar
12. Morimoto, R. et al., “Low-Resistivity Phosphorus-Doped Polycrystalline Silicon Thin Films Formed by Catalytic Chemical Vapor Deposition and Successive Rapid Thermal Annealing,” Jpn. J. Appl. Phys., 41 (2A), 2002, pp. 501–506.Google Scholar
13. Suzuki, K. et al., “Resistivity of Heavily Doped Polycrystalline Silicon Subjected to Furnace Annealing,” Jpn. J. Appl. Phys., 34 (4A), 1995, pp. 1748–1752.Google Scholar
14. Chang, I.S. and Hon, M.H., “Growth characteristics and electrical resistivity of chemical vapor-deposited tungsten film", Thin Solid Films, 333 (1/2), 1998, pp. 108–113.Google Scholar
15. Wright, S.L. et al., “Characterization of Micro-bump C4 Interconnects for Si-Carrier SOP Applications,” Proceedings 56th Electronic Components and Technology Conference., San Diego, CA, 2006, pp. 633–640.Google Scholar
16. Manzer, D. et al., “High-speed electrical testing of multichip ceramic modules,” IBM J. Res. Dev., 49 (4/5), 2005, pp. 687–697.Google Scholar