Hostname: page-component-76fb5796d-wq484 Total loading time: 0 Render date: 2024-04-26T01:22:52.039Z Has data issue: false hasContentIssue false
  • English
  • Français

Comparison of the Behavior of Trace Elements During Acid Leaching of Ashes from Several Coals

Published online by Cambridge University Press:  25 February 2011

J. S. Watson
J. S. Watson*
Affiliation:
Chemical Technology Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831-6224
Get access

Abstract

The leaching of fly ash from eastern U.S. coals with strong mineral acid is the initial step in a series of potential processes for producing useful and marketable materials from the ash. This initial leaching step removes most, or all, of the more soluble (generally amorphous) materials from the ash and leaves an inert residue, believed to be mostly mullite and silica. Chemical analyses of the leachate and the residual inert materials indicate the original distribution of the trace elements in the phases. Significant differences in crystallography, composition and leaching behavior have been noted in ash samples from coals from various regions, of various types, and sometimes even in ash samples from the same or similar coals. Trace element analyses of fly ash leachates provide a useful means of studying coal characteristics and of determining how the trace elements are incorporated in various types of fly ashes.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 86: Symposium N – Fly Ash and Coal Conversion By-Products III , 1986 , 27
Copyright
Copyright © Materials Research Society 1987

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Scheetz, B.E. and White, W.B., in Fly Ash and Coal Conversion By-Products: Characterization, Utilization, and Disposal I, Mat. Res. Soc. Symp. Proc. Vol.43, edited by McCarthy, G.J. and Lauf, R.J. (Materials Research Society, Pittsburgh, 1985), pp. 53–60.Google Scholar
2. Roy, D.M., Luke, K., and Diamond, S., in Fly Ash and Coal Conversion By-Products: Characterization, Utilization, and Disposal I, Mat. Res. Soc. Symp. Proc. Vol.43, edited by McCarthy, G.J. and Lauf, R.J. (Materials Research Society, Pittsburgh, 1985), pp. 3–20.Google Scholar
3. Watson, J.S., Jones, G., and Wilder, R.F., Recovery of Metal Oxides from Fly Ash Including Ash Beneficiation Products. Vol.2: Resource Analyses and Evaluation, EPRI CS-4384, Electric Power Research Institute, Palo Alto, California (1986).Google Scholar
4. Watson, J.S., in Fly Ash and Coal Conversion By-Products: Characterization, Utilization, and Disposal II, Mat. Res. Soc. Symp. Proc. Vol.65, edited by McCarthy, G.J., Glasser, F.P. and Roy, D.M. (Materials Research Society, Boston, Massachusetts, 1985), pp. 59–67.Google Scholar
5. Canon, R.M., Gilliam, T.M., and Watson, J.S., Evaluation of Potential Processes for Recovery of Metals from Coal Ash, Vol.1, EPRI CS-1992, Electric Power Research Institute, Palo Alto, California (1981).Google Scholar
6. Kelmers, A.D. et al., Res. Conserv. 9, 271–79 (1982).Google Scholar
7. Hulett, L.D. Jr. et al., Science 210, 1356–58 (1980).Google Scholar
8. Aldrich, R.G. and Zacharias, W.J., in The Challenge of Change - Sixth International Ash Utilization Symposium Proceedings, Vol.2, DOE/METC/82–52, edited by Halow, J.S. and Covey, J.N. (1982), pp. 1–21.Google Scholar
9. Mitas, D., Murtha, M.J., and Burnet, G., in The Challenge of Change - Sixth International Ash Utilization Symposium Proceedings, Vol.2, DOE/METC/82–52, edited by Halow, J.S. and Covey, J.N. (1982), pp. 22–45.Google Scholar
10. Wilson, H.S. and Burns, J.S., in Proceedings of the Seventh International Ash Utilization Symposium and Exposition, Vol.1, DOE/METC-85/6018 (1985), pp. 304–16.Google Scholar