Hostname: page-component-8448b6f56d-m8qmq Total loading time: 0 Render date: 2024-04-19T01:49:26.499Z Has data issue: false hasContentIssue false
  • English
  • Français

Contactless Measurements of Slip Lines Intentionally Introduced in Si Wafers During Rapid Thermal Processing

Published online by Cambridge University Press:  28 February 2011

A. Usami ,
H. Shiraki ,
H. Fujiwara ,
R. Abe ,
N. Osamura ,
M. Ichimura  and
T. Wada
A. Usami
Affiliation:
Nagoya Institute of Technology, Gokiso-cho, showa-ku, Nagoya 466, Japan
H. Shiraki
Affiliation:
Mitsubishi Material Co., Ltd., 1-297 kitabukuro-cho, ohmiya 330, Japan
H. Fujiwara
Affiliation:
Nagoya Institute of Technology, Gokiso-cho, showa-ku, Nagoya 466, Japan
R. Abe
Affiliation:
Nagoya Institute of Technology, Gokiso-cho, showa-ku, Nagoya 466, Japan
N. Osamura
Affiliation:
Nagoya Institute of Technology, Gokiso-cho, showa-ku, Nagoya 466, Japan
M. Ichimura
Affiliation:
Nagoya Institute of Technology, Gokiso-cho, showa-ku, Nagoya 466, Japan
T. Wada
Affiliation:
Nagoya Institute of Technology, Gokiso-cho, showa-ku, Nagoya 466, Japan
Get access

Abstract

The slip lines introduced in Si wafers during rapid thermal processing (RTP) were revealed with focused reflectance microwave probe (RMP) method. The signal intensity of RMP which is related to optically injected excess carrier concentration decreases at slip lines. The region in which the signal intensity decreased is in good agreement with results of X-ray topography and theoretical analysis considering thermal stress caused by temperature drop at the wafer periphery during RTP. According these results, it is considered that carrier lifetime is decreased by slip dislocations which are effective recombination centers.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 224: Symposium F – Rapid Thermal and Integrated Processing I , 1991 , 215
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Singh, R., J. Appl. Phys. 63, R59 (1988)CrossRefGoogle Scholar
2. Nulman, J., Krusius, J. P., and Gat, A., IEEE Electron Device Lett. EDL-6, 205 (1985)Google Scholar
3. Usami, A., Ando, M., Tsunekane, M., Yamamoto, K., Wada, T., and Inoue, Y. in Proc. 18th IEEE Photovoltaic Specialists Conf. 797 (1985)Google Scholar
4. Bentini, G., Correra, L., and Donolato, C., J. Appl. Phys. 56, 2922 (1984)CrossRefGoogle Scholar
5. Byung, J. C., and Choong, K. K., J. Appl. Phys. 67, 7583 (1990)Google Scholar
6. Usami, A., Yamada, N., Matsuki, K., Takeuchi, T., and Wada, T., J. Crystal Growth 103, 179 (1990)CrossRefGoogle Scholar
7. Katakama, M., Usami, A., Wada, T. and Tokuda, Y., J. Appl. Phys. 62, 528(1987)CrossRefGoogle Scholar
8. Usami, A., Yamada, N., Matsuki, K. and Wada, T. in Mater. Res. Soc. Symp.Proc. 146, (Mater. Res. Soc. Pittsburgh, PA, 1989) p.359 Google Scholar
9. Usami, A., Tokuda, Y., Katayama, M., Kaneshima, S., and Wada, T., J. Phys. D (Appl. Phys.) 19, 1079 (1986)CrossRefGoogle Scholar
10. Usami, A., Kitagawa, A., and Wada, T., Appl. Phys. Lett. 54, 831(1989)CrossRefGoogle Scholar
11. Honeycombe, R. W. K. in The Plastic Deformation of Metals (Edward Arnold, London 1968) pp.27–29 Google Scholar