Hostname: page-component-7c8c6479df-ph5wq Total loading time: 0 Render date: 2024-03-27T04:06:23.019Z Has data issue: false hasContentIssue false

Dependence of 4H-SiC Epitaxial Layer Quality on Growth Conditions with Wafer Size Corresponding to 150 mm

Published online by Cambridge University Press:  13 June 2012

Chiaki Kudou
Affiliation:
R&D Partnership for Future Power Electronics Technology (FUPET), 16-1 Onogawa, Tsukuba, Ibaraki, 305-8569, Japan 506 Device Module Development Center, Panasonic Corporation, 700, Tomonobu, Bizen City, Okayama, 705-8585, Japan.
Kentaro Tamura
Affiliation:
R&D Partnership for Future Power Electronics Technology (FUPET), 16-1 Onogawa, Tsukuba, Ibaraki, 305-8569, Japan 506 ROHM Co., Ltd, 21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto, 615-8585, Japan,
Takashi Aigo
Affiliation:
R&D Partnership for Future Power Electronics Technology (FUPET), 16-1 Onogawa, Tsukuba, Ibaraki, 305-8569, Japan 506 NIPPON STEEL CORPORATION, 20-1 Shintomi, Futtsu, Chiba-prefecture, 293-8511, Japan,
Wataru Ito
Affiliation:
R&D Partnership for Future Power Electronics Technology (FUPET), 16-1 Onogawa, Tsukuba, Ibaraki, 305-8569, Japan 506 NIPPON STEEL CORPORATION, 20-1 Shintomi, Futtsu, Chiba-prefecture, 293-8511, Japan,
Johji Nishio
Affiliation:
R&D Partnership for Future Power Electronics Technology (FUPET), 16-1 Onogawa, Tsukuba, Ibaraki, 305-8569, Japan 506 Toshiba Corporation, 1, Komukai-Toshiba-cho, Saiwai-ku, Kawasaki, 212-8582, Japan,
Kazutoishi Kojima
Affiliation:
R&D Partnership for Future Power Electronics Technology (FUPET), 16-1 Onogawa, Tsukuba, Ibaraki, 305-8569, Japan 506 National Institute of Advanced Industrial Science and Technology (AIST), 1-1-1 Umezono, Tsukuba, Ibaraki 305-8568, Japan
Toshiyuki Ohno
Affiliation:
R&D Partnership for Future Power Electronics Technology (FUPET), 16-1 Onogawa, Tsukuba, Ibaraki, 305-8569, Japan 506 Hitachi, Ltd, 1-280, Higashi-koigakubo, Kokubunji-shi, Tokyo, 185-8601, Japan,
Get access

Abstract

Homoepitaxial growth on 4H-SiC Si-face substrates with sizes corresponding to 150 mm was carried out. The influence of growth conditions for uniformity and epitaxial defect density was investigated. A 150 mm size was realized by using two 76.2 mm wafers lined up in a radial direction. C/Si ratio is found to be a major parameter for controlling triangular defect density and the generation of step bunching. As a result, the surface morphology without bunched step structure and the triangular defect density with 0.5 cm−2 were obtained by decreasing C/Si ratio to 1.0 on the size corresponding to 150 mm. Under this condition, good carrier concentration and thickness uniformity of σ/mean =15.2 % and 1.7 % could be obtained.

Type
Research Article
Copyright
Copyright © Materials Research Society 2012

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

3. Uchida, M. et al. ., the IEEE International Electron Devices Meeting (IEDM) 2011, p.602 (2011) Washington, DC, USA.Google Scholar
6. Burk, A. A. et al. , International Conference on Silicon Carbide and Related Materials (ICSCRM) 2011 p.286 Ohio, USA.Google Scholar
7. Hatakeyama, T. et al. ., Mater. Sci. Forum 645648 (2010) 799804.Google Scholar
8. Fujiwara, H. et al. ., International Conference on Silicon Carbide and Related Materials (ICSCRM) 2011 p.383 Ohio, USA.Google Scholar
9. Wada, K. et al. ., Journal of Crystal Growth 291 (2006) 370374.Google Scholar
10. Kojima, K. et al. ., Journal of Crystal Growth 275 (2005) e549e554.Google Scholar
11. Miyanagi, T., Nishio, S.. Materials Science Forum Vols. 389393 (2002) pp. 199202.Google Scholar
12. Larkin, D. J. et al. ., Appl. Phys. Lett. 65, 1659 (1994).Google Scholar