Hostname: page-component-76fb5796d-r6qrq Total loading time: 0 Render date: 2024-04-25T21:07:50.277Z Has data issue: false hasContentIssue false
  • English
  • Français

The Development of Surface Roughness and Implications for Cellular Attachment in Biomedical Applications

Published online by Cambridge University Press:  15 March 2011

Bruce Banks ,
Sharon Miller ,
Kim de Groh ,
Amy Chan  and
Mandeep Sahota
Bruce Banks
Affiliation:
NASA Glenn Research Center, Cleveland, Ohio 44135, U.S.A.
Sharon Miller
Affiliation:
NASA Glenn Research Center, Cleveland, Ohio 44135, U.S.A.
Kim de Groh
Affiliation:
NASA Glenn Research Center, Cleveland, Ohio 44135, U.S.A.
Amy Chan
Affiliation:
Ohio Aerospace Institute, Cedar Point Road, Cleveland, Ohio 44142, U.S.A.
Mandeep Sahota
Affiliation:
Cleveland State University, Cleveland, Ohio 44115-2406, U.S.A.
Get access

Abstract

The application of a microscopic surface texture produced by ion beam sputter texturing to the surfaces of polymer implants has been shown to result in significant increases in cellular attachment compared to smooth surface implants in animal studies. A collaborative program between NASA Glenn Research Center and the Cleveland Clinic Foundation has been established to evaluate the potential for improving osteoblast attachment to surfaces that have been microscopically roughened by atomic oxygen texturing. The range of surface textures that is feasible depends upon both the texturing process and the duration of treatment. To determine whether surface texture saturates or continues to increase with treatment duration, an effort was conducted to examine the development of surface textures produced by various physical and chemical erosion processes. Both experimental tests and computational modeling were performed to explore the growth of surface texture with treatment time. Surface texturing by means of abrasive grit blasting of glass, stainless steel and polymethylmethacrylate surfaces was examined to measure the growth in roughness with grit blasting duration by surface profilometry measurements. Laboratory tests and computational modeling was also conducted to examine the development of texture on Aclar® (chlorotrifluoroethylene) and Kapton® polyimide, respectively. For the atomic oxygen texturing tests of Aclar®, atomic force microscopy was used to measure the development of texture with atomic oxygen fluence. The results of all the testing and computational modeling support the premise that development of surface roughness obeys Poisson statistics. The results indicate that surface roughness does not saturate but increases as the square root of the treatment time.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 705: Symposium Y – Nanopatterning–From Ultralarge-Scale Integration to Biotechnology , 2001 , Y5.4
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Banks, B. A., Chapter 11 in Ion Bombardment Modification of Surfaces in Biomedical Applications, edited by Auciello, O. and Kelly, R., Elsevier Publishing Co., 1984.Google Scholar
2. Picha, G. J., “Tissue Response to Peritoneal Implants”, NASA CR-159817, June 1980.Google Scholar
3. Banks, B. A., Chapter 17 entitled “Topography: Texturing Effects” in Handbook of Ion Beam Processing Technology, edited by Cuomo, Jerome J., Rossnagel, Stephen M., and Kaufman, Harold R.; Noyes Publications, 1988.Google Scholar
4. Banks, B. A., “Ion Beam Applications Research - A 1981 Summary of Lewis Research Center Programs,” NASA TM No. 81721; presented at the 15th IEP Conference cosponsored by the AIAA, Japan Society for Aeronautical and Space Sciences, and Deutsche Gesselschaft for Luft und Raumfahrt, Las Vegas, Nevada, April 21-23, 1981.Google Scholar
5. de Groh, K. K., Banks, B. A., and Smith, D. C., “Environmental Durability Issues for Solar Power Systems in Low Earth Orbit”, Proceedings of the 1995 International Solar Energy Conference, Lahaina, Maui, Hawaii, NASA TM 106775, March 19-24, 1995.Google Scholar
6. Banks, B. A., Stueber, T.J., Snyder, S. A., Rutledge, S. K., and Norris, M. J., “Atomic Oxygen Erosion Phenomena,” presented at the American Institute of Aeronautics & Astronautics, Defense and Space Programs Conference, Huntsville, AL, Sept. 23-25, 1997.Google Scholar
7.ASTM E 2089-00 Standard Practices for Ground Laboratory Atomic Oxygen Interaction Evaluation of Materials for Space Applications, approved May 10, 2000, published June 2000.Google Scholar
8.Personal communication with Ron Midura of the Cleveland Clinic Foundation.Google Scholar