Hostname: page-component-76fb5796d-vvkck Total loading time: 0 Render date: 2024-04-25T20:32:58.142Z Has data issue: false hasContentIssue false
  • English
  • Français

Dewetting of Reactive CaMgSiO4 Glass Films on Single-Crystal MgO(001) Substrate

Published online by Cambridge University Press:  10 February 2011

S. V. Yanina  and
C. B. Carter
S. V. Yanina
Affiliation:
Department of ChemistryUniversity of Minnesota, Minneapolis, MN 55455
C. B. Carter
Affiliation:
Department of Chemical Engineering and Materials Science, University of Minnesota, Minneapolis, MN 55455
Get access

Abstract

The early stages of dewetting of a reactive silicate (CaMgSiO4) film on a ceramic (MgO) substrate were studied by scanning probe microscopy. Subsequent interactions between the glass phase and an underlying single-crystal substrate, such as dissolution/re-precipitation of substrate material at the glass-ceramic interface and evaporation of silicate phase, were investigated by observing selected areas of the specimens through a series of annealing-quenching cycles. Implications deduced from the CaMgSiO4-MgO equilibrium phase diagram on the process of dissolution/re-precipitation of MgO are briefly discussed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 586: Symposium M – Interfacial Engineering for Optimized Properties II , 1999 , 87
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1 Johnson, D. L., in Sintering Processes, edited by Kuczynski, G. C. (Materials Science Research Series, 13, Plenum Press, New York, 1980), p. 97.10.1007/978-1-4899-5301-8_7Google Scholar
2 Ramamurthy, S., Schmalzried, H., and Carter, C. B., submitted to Phil. Mag. (1999).Google Scholar
3 Hubble, D. H. and Dodge, N. B., J. Amer. Ceram. Soc. 43, 343 (1960).10.1111/j.1151-2916.1960.tb13668.xGoogle Scholar
4 Yang, H. Y., Amer. Mineral. 58, 343 (1973).Google Scholar
5 Ravishankar, N., Ramamurthy, S., Schmalzried, H. et al., Microscopy and Microanalysis ‘99 (Springer, Portland, OR, 1999), 5 (suppl. 2), p. 812.Google Scholar
6 Saiz, E., Tomsia, A. P., and Cannon, R. M., Acta Mater. 46, 2349 (1998).Google Scholar
7 Ricker, R. W. and Osborn, E. F., J. Amer. Ceram. Soc. 37, 136 (1954).Google Scholar
8 Huppmann, W. J. and Petzow, G., in Sintering Processes, edited by Kuczynski, G. C. (Materials Science Research Series, 13, Plenum Press, New York, 1980), p. 189.10.1007/978-1-4899-5301-8_17Google Scholar