Hostname: page-component-54dcc4c588-r5qjk Total loading time: 0 Render date: 2025-09-11T13:05:16.939Z Has data issue: false hasContentIssue false
  • English
  • Français

Dislocations and Slip Systems in V3Si

Published online by Cambridge University Press:  01 January 1992

L.S. Smith ,
M. Aindow  and
M.H. Loretto
L.S. Smith
Affiliation:
IRC in Materials for High Performance Applications, and School of Metallurgy and Materials, The University of Birmingham, Edgbaston, Birmingham, B15 2TT, UK.
M. Aindow
Affiliation:
IRC in Materials for High Performance Applications, and School of Metallurgy and Materials, The University of Birmingham, Edgbaston, Birmingham, B15 2TT, UK.
M.H. Loretto
Affiliation:
IRC in Materials for High Performance Applications, and School of Metallurgy and Materials, The University of Birmingham, Edgbaston, Birmingham, B15 2TT, UK.
Get access

Abstract

A transmission electron microscopy study of the defect structure in Czochralski single crystals of V3Si is presented. As grown crystals contain occasional V5Si3 precipitates and a low density of edge dislocations with b = a<100>. Following deformation to 4% strain at 1600°C in compression much higher densities of precipitates and screw dislocations are present. Images of the dislocations are doubled under certain conditions and it is suggested that this corresponds to a dissociation of the form; a<100> ∭ a/2<100> + CSF + a/2<100>, as observed previously in Nb3Al. The significance of this dissociation for deformation mechanisms in V3Si is discussed.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 288: Symposium L – High-Temperature Ordered Intermetallic Alloys V , 1992 , 477
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

1 Levinstein, H.J., Greiner, E.S. and Mason, H. Jr., J. Appl. Phys., 37, 164 (1966).Google Scholar
2 Wright, R.N. and Bok, K.A., Met. Trans. A, 19, 1125 (1988).Google Scholar
3 Essman, U., Haag, H. and Zerweck, G., Comm. on Phys., 2, 127 (1977).Google Scholar
4 Lamine, A.B. and Reynaud, F., Phil. Mag. A, 38, 359 (1978).Google Scholar
5 Nakahara, S., Mahajan, S., Wernick, J.H. and Chin, G.Y., J.Appl. Phys., 50, 3552 (1979).Google Scholar
6 Kramer, U., Phil. Mag. A, 47, 721 (1983).Google Scholar
7 Reynaud, F. and Lamine, A.B., Acta Met., 29, 1485 (1981).Google Scholar
8 Nghiep, D.M., Paufler, P., Kramer, U. and Kleinstuck, K., J. Mat. Sci., 15, 1140 (1980).Google Scholar
9 Aindow, M., Shyue, J., Gaspar, T.A. and Fraser, H.L., Phil. Mag. Lett., 64, 59 (1991).Google Scholar
10 Smith, L.S., Aindow, M. and Loretto, M.H., in preparation.Google Scholar
11 Shyue, J., Ph.D. Thesis, The Ohio State University (1992).Google Scholar