Hostname: page-component-848d4c4894-wzw2p Total loading time: 0 Render date: 2024-05-21T19:10:35.856Z Has data issue: false hasContentIssue false
  • English
  • Français

The Effects of Modulation on an RF Discharge in Silane and on the Deposited a-Si:H

Published online by Cambridge University Press:  25 February 2011

L. J. Overzet ,
J. T. Verdeyen ,
R. M. Roth  and
F. F. Carasco
L. J. Overzet
Affiliation:
University of Illinois, Gaseous Electronics Laboratory, 607 E. Healey, Champaign, IL 61820
J. T. Verdeyen
Affiliation:
University of Illinois, Gaseous Electronics Laboratory, 607 E. Healey, Champaign, IL 61820
R. M. Roth
Affiliation:
Amoco Corporation, Corporate Research Department, P.O. Box 400, Naperville, IL 60566
F. F. Carasco
Affiliation:
Amoco Corporation, Corporate Research Department, P.O. Box 400, Naperville, IL 60566
Get access

Abstract

The time evolution of the electron density and the optical emission intensity in response to a square wave modulated RF excitation of helium-silane mixtures has been studied and compared to that for the more conventional CW discharge. In addition, the films deposited from CW and modulated RF glows have-been compared on the basis of absorption coefficients and photoconductivities. Films deposited from modulated glows at substrate temperatures below 200°C have significantly smaller optical bandgaps than those deposited from comparable CW discharges. The bulk electron density in the modulated discharge undergoes a complex temporal variation and its time average value can be significantly larger than that in the CW glow despite the lower average power. A dissociative attachment process involving silane radicals, SiHn (n = 1 to 3), is identified as the most probable cause.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 98: Symposium K – Plasma Processing and Synthesis of Materials II , 1987 , 321
Copyright
Copyright © Materials Research Society 1987

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Overzet, L. J., and Verdeyen, J. T., Appl. Phys. Lett. 48, 695 (1986).Google Scholar
[2] Turban, G., Catherine, Y., and Grolleau, G., Thin Solid Films 60,147 (1979).Google Scholar
[3] Turban, G., Catherine, Y., and Grolleau, G., Plasma Chem. Plasma Process. 1, 61 (1982).Google Scholar
[4] Kampas, F. J., J. AppI. Phys. 54, 2276 (1983).Google Scholar
[5] Hebner, G. A. and Verdeyen, J. T., IEEE Trans. Plasma Science PS–14, 132 (1986).Google Scholar
[6] Fleddermann, C. B., Beberman, J. H., and Verdeyen, J. T., J. Appl. Phys. 58, 1344 (1985).Google Scholar
[7] Robertson, R., and Gallagher, A., J. Appl. Phys. 59, 3402 (1986).Google Scholar
[8] Spear, W. E. and LeComber, P. G., Philos. Mag. 33, 935 (1976).Google Scholar