Hostname: page-component-76fb5796d-45l2p Total loading time: 0 Render date: 2024-04-27T00:23:10.667Z Has data issue: false hasContentIssue false
  • English
  • Français

Electrical Properties of Novel Anodic Films Formed in Nonaqueous Electrolyte Solutions

Published online by Cambridge University Press:  10 February 2011

F. Mizutani ,
S. Takeuchi ,
T. Nishiwaki ,
N. Sato  and
M. Ue
F. Mizutani
Affiliation:
Tsukuba Research Center, Mitsubishi Chemical Corporation, 8–3–1, Chuo, Ami, Inashiki, Ibaraki 300–0397, JAPAN.
S. Takeuchi
Affiliation:
Tsukuba Research Center, Mitsubishi Chemical Corporation, 8–3–1, Chuo, Ami, Inashiki, Ibaraki 300–0397, JAPAN.
T. Nishiwaki
Affiliation:
Tsukuba Research Center, Mitsubishi Chemical Corporation, 8–3–1, Chuo, Ami, Inashiki, Ibaraki 300–0397, JAPAN.
N. Sato
Affiliation:
Tsukuba Research Center, Mitsubishi Chemical Corporation, 8–3–1, Chuo, Ami, Inashiki, Ibaraki 300–0397, JAPAN.
M. Ue
Affiliation:
Tsukuba Research Center, Mitsubishi Chemical Corporation, 8–3–1, Chuo, Ami, Inashiki, Ibaraki 300–0397, JAPAN.
Get access

Abstract

An aluminum alloy (Al - 1.0% Si - 0.5% Cu) was anodized in nonaqueous electrolyte solutions containing propylene carbonate (PC), ethylene glycol (EG), or γ-butyrolactone (GBL) as a solvent. MIM (metal-insulator-metal) elements using these anodic films were made to evaluate their electrical properties. Leakage current of the anodic films formed in the nonaqueous solutions was lower than those formed in aqueous electrolyte solutions. These novel films are useful as a high insulating film used for a gate insulator in thin film transistor liquid crystal displays (TFT-LCD).

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 500: Symposium EE – Electrically Based Microstructural Characterization II , 1997 , 113
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Tsukada, T. in Amorphous Insulating Thin Films, edited by Kanicki, J., Wallen, W. L., Devine, R. A. B., and Matsumura, M. (Mater. Res. Soc. Proc. 284, Warrendale, PA, 1993), pp. 371–382.Google Scholar
2. Chiu, R. -L., Chang, P. -H., and Tung, C. -H., J. Electrochem. Soc, 142, 525 (1995).Google Scholar
3. Ue, M., Sato, T., Asahina, H., Ida, K., and Mori, S., DenkiKagaku, 60, 480 (1992).Google Scholar
4. Ue, M., Asahina, H., and Mori, S., J. Electrochem. Soc, 142, 2266 (1995).Google Scholar
5. Ue, M., Mizutani, F., Takeuchi, S., and Sato, N., J. Electrochem. Soc, 144, 3743 (1997).Google Scholar
6. Ue, M., Mizutani, F., Takeuchi, S., and Sato, N., Denki Kagaku, 65, 1070 (1997).Google Scholar