Hostname: page-component-848d4c4894-2pzkn Total loading time: 0 Render date: 2024-05-22T07:55:40.706Z Has data issue: false hasContentIssue false
  • English
  • Français

Extrusion Rheology and Structure of Alumina - Silicon Carbiide Composites

Published online by Cambridge University Press:  15 February 2011

S Blackburn
S Blackburn*
Affiliation:
Interdisciplinary Research Centre in Materials for High Performance Applications and School of Chemical Engineering, The University of Birmingham, Edgbaston, Birmingham B 15 2TT, United Kingdom.
Get access

Abstract

Silicon carbide fibre reinforced alumina compacts were formed by extrusion. The powder and fibre were pre-mixed and milled before high shear kneading to produce a homogeneous dispersion of up to 30 vol% chopped SiC fibre with high green density. The rheology of the paste was characterised using a physically based model. It is demonstrated that the pressure drop and constituent paste parameters are all systematically reduced with increasing fibre loadings for a given moisture content. It is suggested that particle packing theory in combination with fibre interactions within the paste and die system offers an explanation for the observed results.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 289: Symposium M – Flow and Microstructure of Dense Suspensions , 1992 , 135
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Hanney, M.J. and Morrell, R., Poc. Brit. Ceram. Soc., 32, 277 (1982).Google Scholar
2. Benbow, J.J., Oxley, E.W. and Bridgwater, J., Chem. Eng. Sci., 42, [9], 2151 (1987).Google Scholar
3. Blackburn, S. and Lawson, T.A., J. Am. Ceram. Soc., 75, [4], 953 (1992).Google Scholar
4. Homeny, J., Vaughn, W.L. and Ferber, M.K., Am. Ceram. Soc. Bull., 67, 333 (1987).Google Scholar
5. Coyle, T.W., Guyot, M.H. and Jamet, J.F., Ceram. Eng. Sci. Proc., 7, [7–8], 947 (1986).Google Scholar
6. Nieto, M.I., Miranzo, P., Moya, J.S. and Aza, S. de, Proc. 2nd Euro. Ceram. Soc. Conf., (1991) in press.Google Scholar
7. Willson, M.C., Proc. Brit. Ceram. Soc. “Engineering Ceramics: Fabrication Science and Technology”. (1991). In Press.Google Scholar
8. Böhm, H. and Blackburn, S.. IchemE Reasearch Event 1993.Google Scholar
9. Furnas, C.C., U.S. Bureau of Mines, Bulletin, 307 (1929).Google Scholar
10. Barnes, H.A., Hutton, J.F. and Walters, K., An Introduction To Rheology, (Elsevier, Amsterdam, 1989) p.124.Google Scholar