Hostname: page-component-848d4c4894-ndmmz Total loading time: 0 Render date: 2024-05-17T00:09:13.763Z Has data issue: false hasContentIssue false
  • English
  • Français

Ftir and Xps Studies of Polyimide/Metal Interface Formation

Published online by Cambridge University Press:  22 February 2011

William C. Stewart ,
Jihperng Leu  and
Klavs F. Jensen
William C. Stewart
Affiliation:
United States Air Force, FTD/TQTRE, Wright Patterson AFB, OH 45433-6508
Jihperng Leu
Affiliation:
Department of Chemical Engineering and Materials Science, University of Minnesota, Minneapolis, MN 55455
Klavs F. Jensen
Affiliation:
Department of Chemical Engineering and Materials Science, University of Minnesota, Minneapolis, MN 55455
Get access

Abstract

We describe infrared and x-ray photoelectron spectroscopy studies of the interfaces formed when the PMDA/ODA polyamic acid is imidized on gold, chromium, and copper. Polyimide films ranging from 34 ° to 1328 ° are analyzed as part of these studies. The IR and XPS results indicate that the gold interacts very little with the polyimide, while copper produces significant changes in the IR and XPS spectra. At elevated cure temperatures passivated chromium also reacts with the polyimide. In structures with chromium and copper, the thermal stability of the polyimide at the interface is reduced from that of bulk polyimide. The data demonstrate that the metals interact with the polymer structure at the point where ring closure occurs to form the polyimide from polyamic acid.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 153: Symposium J – Interfaces Between Polymers, Metals, and Ceramics , 1989 , 285
Copyright
Copyright © Materials Research Society 1989

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Samuelson, G., in Polymer Materials for Electronic Applications, edited by Feit, E.D. and Wilkins, C.W. Jr., (ACS Symposium Series 184, American Chemical Society, 1982) pp. 93–106.Google Scholar
2. Wilson, A.M., Polyimides: Synthesis. Characterization. and Applications, edited by Mittal, K.L., (Plenum Press, 1984) pp. 715–733.Google Scholar
3. Day, D.R., Ridley, D., Mario, J., and Senturia, S.D., Polyimides:Synthesis. Characterization. and Applications, edited by Mittal, K.L., (Plenum Press, 1984) pp. 767–781.Google Scholar
4. Chou, C.C. and Wang, W.V., Polyimides: Synthesis. Characterization. and Applications, edited by Mittal, K.L., (Plenum Press, 1984) pp. 783–793.Google Scholar
5. Mukai, K., Saiki, A., Yamanaka, K., Harada, S., and Shoji, S., IEEE J. Solid State Circuits, SC–13 (4), 462–467.Google Scholar
6. Shah, P., Laks, D., and Wilson, A., IEEE Proceedings IEDM 79, 465–468 (1979).Google Scholar
7. Nishida, T., Saiki, A., Homma, Y., and Mukai, K., IEEE Proceedings IEDM 82, 552–555 (1982).Google Scholar
8. Theuwissen, A.J.P. and Declerck, G.J., IEEE Electron Device Letters, EDL–3 (10), 308–309, (1982).Google Scholar
9. Jensen, R.J., Cummings, J.P., and Vora, H., IEEE Transactions on Components, Hybrids, and Manufacturing Technology, CHMT–7 (4), 384–393, (December 1984).Google Scholar
10. Sainati, R., Honeywell Physical Sciences Center, Bloomington, MN. Contract No. F30602-85-C-0054, Rome Air Development Center, Griffiss AFB, NY.Google Scholar
11. Lee, Y.K. and Craig, J.D., in Polymer Materials for Electronic Applications, edited by Feit, E.D. and Wilkins, C.W. Jr., (ACS Symposium Series 184, American Chemical Society, 1982) pp. 107–121.Google Scholar
12. Meyer, H.M. III, Anderson, S.G., Atanasoska, L.J., and Weaver, J.H., J. Vac. Sci. Technol., A6 (1), 30–37 (1988).Google Scholar
13. Chou, N.J. and Tang, C.H., J. Vac. Sci. Technol., A2 (2), 751–755 (1984).Google Scholar
14. Hahn, P.O., Rubloff, G.W., Bartha, J.W., Legoues, F.K., Tromp, R., and Ho, P.S., Mater. Res. Soc. Symp. Proc. 40, 251 (1985).Google Scholar
15. Ho, P.S., Hahn, P.O., Bartha, J.W., Rubloff, G.W., LeGoues, F.K., and Silverman, B.D., J. Vac. Sci. Technol., A3 (3), 739–745 (1985).Google Scholar
16. Tromp, R.M., LeGoues, F., and Ho, P.S., J. Vac. Sci. Technol., A3 (3), 782–785 (1985).Google Scholar
17. Bartha, J.W., Hahn, P.O., LeGoues, F.K., and Ho, P.S., J. Vac. Sci. Technol., A3(3), 1390–1393 (1985).Google Scholar
18. Atanasoska, L.J., Anderson, S.G., Meyer, H.M. III, Lin, Z., and Weaver, J.H., J. Vac. Sci. Technol., A5 (6), 3325–3333 (1987).Google Scholar
19. Chou, N.J. and Tang, C.H., J. Vac. Sci. Technol., A2 (2), 751–755 (1984).Google Scholar
20. Chou, N.J., Dong, D.W., Kim, J., and Liu, A.C., J. Electrochem. Soc.: Solid-State Science and Technology, 131 (10), 2335–2340 (1984)Google Scholar
21. Jordan, J.L., Sanda, P.N., Morar, J.F., Kovac, C.A., Himpsel, F.J., and Pollak, R.A., J. Vac. Sci. Technol., A4 (3), 1046–1048 (1986).Google Scholar
22. Ohuchi, F.S. and Freilich, S.C., J. Vac. Sci. Technol., A4 (3), 1039–1045 (1986).Google Scholar
23. Kelley, K., Ishino, Y., and Ishida, H., Thin Solid Films, 154, 271–279 (1987).Google Scholar
24. Kowalczyk, S.P., Kim, Y.H., Walker, G.F., and Kim, J., Appl. Phys. Lett., 52 (5), 375–376 (1988).Google Scholar
25. Kim, Y.-H., Kim, J., Walker, G. F., Feger, C., and Kowalczyk, S. P., J. Adhesion Sci. Technol., 2, 95 (1988).Google Scholar
26. Adrova, N.A., Bessonov, M.I., Laius, L.A., and Rudakov, A.P., Polvimides: A New Class of Heat-Resistant Polymers. translated from Russian by J. Schmorak, Israel Program for Scientific Translations (1969).Google Scholar
27. Ishida, H., Wellinghoff, S.T., Baer, E., and Koenig, J.L., Macromolecules, 13, 826–834 (1980).Google Scholar
28. Angelo, R.J., Golike, R.C., Tatum, W.E., and Kreuz, J.A., in Recent Advances in Polvimide Science and Technology, edited by Weber, W.D. and Gupta, M.R., (The Mid-Hudson Chapter of The Society of Plastics Engineers, Inc., 1987) pp. 67–91.Google Scholar
29. Leary, H.J. and Campbell, D.S., Surface and Interface Analysis, 1 (3), 75–81 (1979).Google Scholar
30. Buchwalter, P.L. and Baise, A.I., in Polyimides: Synthesis. Characterization. and Applications, edited by Mittal, K.L., (Plenum Press, 1984) pp. 537–545.Google Scholar
31. Anderson, S.G., Meyer, H.M. III, Atanasoska, Lj., and Weaver, J.H., J. Vac. Sci. Technol., A6 (1), 38–43 (1988).Google Scholar