Hostname: page-component-8448b6f56d-cfpbc Total loading time: 0 Render date: 2024-04-25T05:26:39.064Z Has data issue: false hasContentIssue false
  • English
  • Français

Generation of New Nanomaterials by Interfering Femtosecond Laser Processing

Published online by Cambridge University Press:  01 February 2011

Yoshiki Nakata  and
Okada Tatsuo
Yoshiki Nakata
Affiliation:
Maeda Mitsuo Graduate School of Information Scienceand Electrical Engineering, Kyushu University, 6–10–1 Hakozaki, Higashi-ku, Fukuoka 812–8581, Japan
Okada Tatsuo
Affiliation:
Maeda Mitsuo Graduate School of Information Scienceand Electrical Engineering, Kyushu University, 6–10–1 Hakozaki, Higashi-ku, Fukuoka 812–8581, Japan
Get access

Abstract

New nanomaterials such as nanobump array, nanomesh, nanobelt were generated from thin film processed by interfering femtosecond laser beams. Metallic single- or multi-layered film deposited on a silica substrate was used as a raw thin film. With four interfering femtosecond laser beams, a conical nanobump arrayed in a matrix was generated with single laser shot. As the femtosecond laser fluence increased, the nanobump increased in diameter and height, and a bead was found at the top. Moreover, with three or two interfering femtosecond laser beams, ellipsoidal or linear nanobump array was generated. As an application of a conical nanobump array, field emission from the nanobump array was demonstrated, and the I-V characteristics were measured. On the other hand, with much higher fluence and four interfering femtosecond laser beams, a nanohole array was generated. A nanomesh was also generated from the nanohole array by exfoliating the film. A grating was generated with two interfering femtosecond laser beams, and nanobelts were generated from the grating by exfoliating. Bimetallic nanobelt was also generated from multi-layered thin film.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 850: Symposium MM – Ultrafast Lasers for Materials Science , 2004 , MM1.4
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Iijima, S., Nature 354, 56 (1991).Google Scholar
2. Canham, L. T., Appl. Phys. Lett. 57, 1046 (1990).Google Scholar
3. Kawamura, K., Ogawa, T., Sarukawa, N., Hirano, M., and Hosono, H., Appl. Phys. B, Lasers Opt. 71, 119 (2000).Google Scholar
4. Kondo, T., Matsuo, S., Juodkazis, S., and Misawa, H., Appl. Phys. Lett. 79, 725 (2001).Google Scholar
5. Nakata, Y., Okada, T., Maeda, M., Appl. Phys. Lett. 81, 4239 (2002).Google Scholar
6. Nakata, Y., Okada, T., Maeda, M., Jpn. J. Appl. Phys. 42, L379 (2003).Google Scholar
7. Nakata, Y., Okada, T., Maeda, M., Appl. Phys. A 77, 399 (2003).Google Scholar
8. Nakata, Y., Okada, T., Maeda, M., Jpn, J. Appl. Phys. 42, L1452 (2003).Google Scholar
9. Nakata, Y., Okada, T., Maeda, M., Appl. Phys. A 79, 1481 (2004).Google Scholar
10. Baumgart, P., Krajnovich, D. J., Nguyen, T. A., Tam, A. C., IEEE Trans. Magn. 31, 2946 (1995).Google Scholar