Hostname: page-component-8448b6f56d-t5pn6 Total loading time: 0 Render date: 2024-04-24T11:25:17.720Z Has data issue: false hasContentIssue false
  • English
  • Français

High Density Plasma Silicon Carbide as a Barrier/Etch Stop Film for Copper Damascene Interconnects

Published online by Cambridge University Press:  17 March 2011

Hichem M'Saad ,
Seon-Mee Cho ,
Manoj Vellaikal  and
Zhuang Li
Hichem M'Saad
Affiliation:
Applied Materials, Inc. Dielectric Systems and Modules Santa Clara, CA 95054
Seon-Mee Cho
Affiliation:
Applied Materials, Inc. Dielectric Systems and Modules Santa Clara, CA 95054
Manoj Vellaikal
Affiliation:
Applied Materials, Inc. Dielectric Systems and Modules Santa Clara, CA 95054
Zhuang Li
Affiliation:
Applied Materials, Inc. Dielectric Systems and Modules Santa Clara, CA 95054
Get access

Abstract

A low κ dielectric barrier/etch stop has been developed for use in copper damascene application. The film is deposited using methane, silane and argon as precursors in a HDP-CVD reactor. The film has a dielectric constant of 4.2 which is lower than the dielectric constant of conventional SiC or plasma silicon nitride (>7). Film characterization including physical, electrical, adhesion to ILD films, etch selectivity, and copper diffusion barrier properties show that this film is a better barrier than silicon nitride for low κ copper damascene interconnects. This film consists of a refractive index in the range of 1.7 to 1.8, a compressive stress of 1.0-1.5×109 dynes/cm2, and a leakage current of 5.0×10−10 A/cm2 at 1 MV/cm. When integrated in-situ with HDP-FSG, an effective dielectric constant of 3.5 can be achieved.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 612: Symposium D – Materials, Technology & Reliability for Advanced Interconnects.. , 2000 , D9.14.1
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Poon, T., Ma, J., Naik, M., Tang, B., Yu, M., Lang, C-I, Lou, I., Sugiarto, D., Lee, P., Yau, W-F., Cheung, D., VMIC Conference, p. 190 (1999).Google Scholar
2. Pang, B., Yau, W. F., Lee, P., Naik, M., Semiconductor Fabtech, 10th Edition, p. 285.Google Scholar
3. Naik, M., Parikh, S., Li, P., Educato, J., Cheung, D., Hashim, I., hey, P., Jenq, S., Pan, T., Redeker, F., Rana, V., Tang, B., Yost, D., Proceedings of the IEEE 1999 International Interconnect Technology Conference p.181–3 (1999).Google Scholar
4. Mandal, R. P., Cheung, D., Yau, W.F.; Cohen, B., Rengarajan, S., Chou, E., 10th Annual IEEE/SEMI. Advanced Semiconductor Manufacturing Conference and Workshop. ASMC 99 Proceedings, pp. 299–303 (1999).Google Scholar
5. M'Saad, H., Vellaikal, M., Ma, W., Rossman, K., Advanced Metallization Conference Proceedings, Sept. 1999, p. 22.Google Scholar
6. Loboda, M. J., Seifferly, J.A., Dall, F.C., J. Vac. Sci. Technol. A, 12(1), p. 90(1994).10.1116/1.578864Google Scholar
7. Xu, P., Huang, K., Patel, A., Rathi, S., Tang, B., Ferguson, J., Huang, J., Ngai, C., IITC Conference, 1999.Google Scholar