Hostname: page-component-76fb5796d-22dnz Total loading time: 0 Render date: 2024-04-26T02:20:04.663Z Has data issue: false hasContentIssue false
  • English
  • Français

High Temperature Compressive Properties and Deformation Microstructure of Fe-25Al-10Ti Intermetallic Alloy

Published online by Cambridge University Press:  21 March 2011

Su-Ming Zhu ,
Kazushi Sakamoto ,
Makoto Tamura  and
Kunihiko Iwasaki
Su-Ming Zhu
Affiliation:
Japan Ultra-high Temperature Materials Research Institute, Ube, Yamaguchi 755–0001, Japan
Kazushi Sakamoto
Affiliation:
Japan Ultra-high Temperature Materials Research Institute, Ube, Yamaguchi 755–0001, Japan
Makoto Tamura
Affiliation:
Japan Ultra-high Temperature Materials Research Institute, Ube, Yamaguchi 755–0001, Japan
Kunihiko Iwasaki
Affiliation:
Japan Ultra-high Temperature Materials Research Institute, Ube, Yamaguchi 755–0001, Japan
Get access

Abstract

The compressive properties of Fe-25Al-10Ti intermetallic alloy were studied as a function of temperature and strain rate. Optical microscopy and transmission electron microscopy (TEM) were used to examine the deformation microstructure. The alloy exhibited strong tendency of strain hardening at low temperatures. A positive temperature dependence of strength was observed in the 673 – 873 K range. The mechanical behavior was interpreted in terms of dislocation structures. Based on the analysis of the stress-strain response, strain rate sensitivity and deformation microstructure, possible hot working range was proposed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 646 , 2000 , N5.18.1
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Stoloff, N.S., Mater. Sci. Eng. A258, 1 (1998).Google Scholar
2. Sikka, V.K., in Nickel and Iron Aluminides: Processing, Properties, and Applications, edited by Deevi, S.C., Maziasz, P.J., Sikka, V.K., and Cahn, R.W., (ASM International, Materials Park, OH, 1997), p. 361.Google Scholar
3. Hawk, J.A., Alman, D.E., and Wilson, R.D., in High Temperature Ordered Intermetallic Alloys VI, edited by Horton, J.A., Baker, I., Hanada, S., Noebe, R.D., and Schwartz, D.S., (Mater. Res. Soc. Symp. Proc. 364, Pittsburgh, PA, 1995), p. 243.Google Scholar
4. Hawk, J.A. and Alman, D.E., Mater. Sci. Eng. A239–240, 899 (1997).Google Scholar
5. Diehm, R.S. and Mikkola, D.E., in Temperature Ordered Intermetallic Alloys II, edited by Stoloff, N.S., Koch, C.C., Liu, C.T., and Izumi, O., (Mater. Res. Soc. Symp. Proc. 81, Pittsburgh, PA, 1985), p. 329.Google Scholar
6. Agarwal, A., Akhtar, M.J., and Balasubramaniam, R., J. Mater. Sci. 31, 5207 (1996).10.1007/BF00355926Google Scholar
7. Viswanathan, S., Andleigh, V.K., and McKamey, C.G., in High Temperature Ordered Intermetallic Alloys VI, edited by Horton, J.A., Baker, I., Hanada, S., Noebe, R.D., and Schwartz, D.S., (Mater. Res. Soc. Symp. Proc. 364, Pittsburgh, PA, 1995), p. 97.Google Scholar
8. Edington, J.W., Melton, K.N., and Cutler, C.P., Progr. Mater. Sci. 21, 61 (1976).Google Scholar
9. Lin, D., Shan, A., and Chen, M., Intermetallics 4, 489 (1996).10.1016/0966-9795(96)00027-1Google Scholar
10. Sastry, D.H. and Sundar, R.S., in Nickel and Iron Aluminides: Processing, Properties, and Applications, edited by Deevi, S.C., Maziasz, P.J., Sikka, V.K., and Cahn, R.W., (ASM International, Materials Park, OH, 1997), p. 123.Google Scholar