Hostname: page-component-848d4c4894-cjp7w Total loading time: 0 Render date: 2024-06-20T07:46:30.822Z Has data issue: false hasContentIssue false
  • English
  • Français

A High-Modulus Electroactive Polymer Acting as a Robust Ionomer for Ionic Micro-Actuators

Published online by Cambridge University Press:  22 February 2012

Gokhan Hatipoglu ,
Yang Liu ,
Ran Zhao ,
Mitra Yoonessi ,
Dean M. Tigelaar ,
Srinivas Tadigadapa  and
Q. M. Zhang
Gokhan Hatipoglu
Affiliation:
Department of Electrical Engineering, Pennsylvania State University, University Park, PA 16802, USA
Yang Liu
Affiliation:
Department of Electrical Engineering, Pennsylvania State University, University Park, PA 16802, USA
Ran Zhao
Affiliation:
Department of Electrical Engineering, Pennsylvania State University, University Park, PA 16802, USA
Mitra Yoonessi
Affiliation:
Ohio Aerospace Institute, Cleveland OH, USA NASA Glenn Research Center, Cleveland, OH 44135, USA
Dean M. Tigelaar
Affiliation:
Ohio Aerospace Institute, Cleveland OH, USA NASA Glenn Research Center, Cleveland, OH 44135, USA
Srinivas Tadigadapa
Affiliation:
Department of Electrical Engineering, Pennsylvania State University, University Park, PA 16802, USA
Q. M. Zhang
Affiliation:
Department of Electrical Engineering, Pennsylvania State University, University Park, PA 16802, USA
Get access

Abstract

A high modulus, sulfonated polymer synthesized from one-to-one ratio 4,6-bis(4-hydroxyphenyl)-N, N-diphenyl-1,3,5-triazin-2-amine and 4,4′-biphenol with bis(4-fluorophenyl) sulfone (DPA-PS:BP) is exploited as an ionomer for micro-ionic actuators. A unique and attractive feature of the ionomer is that it can contain high amounts of ionic liquid (IL) as an electrolyte while maintaining a high elastic modulus (i.e 600 MPa for 150 wt% uptake), which is more than one order of magnitude higher than the state-of-the-art of ionomers with working electrolytes. Such a high modulus makes it possible for the ionomer to be fabricated into micro-actuators with high uptake of ILs and low operation voltage (< 4 V), in various free standing forms with ion milling techniques, which are attractive for MEMS applications. As an initial demonstration of a DPA-PS:BP based ionic micro-actuator, a cantilever (200 μm x 33 μm x 5 μm) is manufactured by Focused Ion Beam (FIB) and characterized. Under the voltage of 1.6 V, the bending actuator exhibits an intrinsic strain from the active ionomer of 1.1% and a corresponding blocking force of 27 μN.

Keywords

ionic conductoractuatormicroelectro-mechanical (MEMS)
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1403: Symposium V – Multifunctional Polymer-Based Materials , 2012 , mrsf11-1403-v12-28
Copyright
Copyright © Materials Research Society 2012

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Lin, J., Liu, Y. and Zhang, Q. M., Polymer 52 (2), 540-546 (2011).Google Scholar
2. Liu, C., Advanced Materials 19 (22), 3783-3790 (2007).Google Scholar
3. Tigelaar, D. M., Palker, A. E., He, R., Scheiman, D. A., Petek, T., Savinell, R. and Yoonessi, M., Journal of Membrane Science 369 (1–2), 455-465 (2011).Google Scholar
4. Nemat-Nasser, S. and Wu, Y., Journal of Applied Physics 93 (9), 5255-5267 (2003).Google Scholar
5. Liu, S., Montazami, R., Liu, Y., Jain, V., Lin, M., Heflin, J. R. and Zhang, Q. M., Applied Physics Letters 95 (2), 023505-023505-023503 (2009).Google Scholar
6. Liu, S., Montazami, R., Liu, Y., Jain, V., Lin, M., Zhou, X., Heflin, J. R. and Zhang, Q. M., Sensors and Actuators A: Physical 157 (2), 267-275 (2010).Google Scholar
7. Wang, Q.-M., Zhang, Q., Xu, B., Liu, R. and Cross, L. E., Journal of Applied Physics 86 (6), 3352-3360 (1999).Google Scholar