Hostname: page-component-54dcc4c588-r5qjk Total loading time: 0 Render date: 2025-09-18T23:21:55.281Z Has data issue: false hasContentIssue false
  • English
  • Français

Improved Microstructures for Thermal Barrier Coatings Produced by Glancing Angle Deposition

Published online by Cambridge University Press:  10 February 2011

K. D. Harris ,
D. Vick ,
M. J. Brett  and
K. Robbie
K. D. Harris
Affiliation:
Department of Electrical and Computer Engineering, University of Alberta, Edmonton, AB, Canada, T6G-2G7, kdharris@ee.ualberta.ca
D. Vick
Affiliation:
Department of Electrical and Computer Engineering, University of Alberta, Edmonton, AB, Canada, T6G-2G7, kdharris@ee.ualberta.ca
M. J. Brett
Affiliation:
Department of Electrical and Computer Engineering, University of Alberta, Edmonton, AB, Canada, T6G-2G7, kdharris@ee.ualberta.ca
K. Robbie
Affiliation:
Department of Physics (IFM), Linköping University, Linköping, Sweden
Get access

Abstract

A new approach to deposition of thin films for thermal barrier applications is described. During electron beam evaporation, the extreme shadowing effect that is present at highly oblique incidence is employed to introduce porosity into thin films of zirconia. Using controlled substrate motion a solid capping layer may be applied to these porous films. By depositing layers of porous material and capping in an alternating fashion a new structure is produced which warrants evaluation as an improved thermal barrier coating.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 555: Symposium OO – Properties and Processing of Vapor-Deposited Coatings , 1998 , 97
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

i) Meier, S.M., Gupta, D.K., Trans. ASME, 116, 250 (1994)Google Scholar
ii) CRC Handbook of Chemistry and Physics, 56th ed., (CRC Press, Cleveland, 1975), p. E–3 Google Scholar
iii) Taylor, R.E., Mater, Sci. E., A245, 160 (1998)Google Scholar
iv) DeMasi-Marcin, J.T., Sheffler, K.D., Bose, S., J. Eng. Gas Turbines Power, 112, 521 Google Scholar
v) Strangman, T.E., US Patent No. 4,321,311Google Scholar
vi) Robbie, K., Sit, J.C., Brett, M.J., J. Vac. Sci. Technol. B, 16, 1115 (1998)Google Scholar
vii) Robbie, K., Brett, M.J., J. Vac. Sci. Technol. A, 15, (3), 1460 (1997)Google Scholar
viii) Tait, R.N., Smy, T., and Brett, M.J., Thin Sol. Fi., 226, 196 (1993)Google Scholar
ix) Klemens, P.G., Gell, M., Mater. Sci. E., A245, 143 (1998)Google Scholar