Hostname: page-component-76fb5796d-vfjqv Total loading time: 0 Render date: 2024-04-25T22:36:31.588Z Has data issue: false hasContentIssue false
  • English
  • Français

Influence of Formation Parameters on the Mechanical Properties of Wet Gels

Published online by Cambridge University Press:  25 February 2011

S. A. Pardenek ,
J. W. Fleming  and
L. C. Klein
S. A. Pardenek
Affiliation:
AT&T Bell Laboratories, 600 Mountain Avenue, Murray Hill, N.J. 07974
J. W. Fleming
Affiliation:
AT&T Bell Laboratories, 600 Mountain Avenue, Murray Hill, N.J. 07974
L. C. Klein
Affiliation:
Rutgers College of Engineering, Dept. of Ceramics, Box 909, Piscataway, N.J. 08854
Get access

Abstract

The mechanical behavior of wet silica gels formed by various sol-gel processes has been studied. Samples were analyzed with a beam-bending apparatus specifically designed for accurate measurements of very low strength solids. Breaking strength, viscosity and relaxation measurements were made on gelled bodies. Specimens were studied in an undried gel state, molded in shapes suitable for the particular experiments. Tests were made in several ambient conditions including immersion in a liquid bath. The mechanical properties of gels are dependent upon the gel composition, gel age and other formation parameters such as pH, temperature and pressure. An understanding of these properties is particularly important in determining the nature of subsequent processing steps. Models for the structures of the various gels are proposed which explain variation in mechanical behavior.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 88: Symposium P – Optical Fiber Materials and Properties , 1986 , 73
Copyright
Copyright © Materials Research Society 1987

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Fleming, J. W., Advances in Ceramic Powder Processing, (August 1986).Google Scholar
2. Iler, R. K., The Chemistry of Silica, John Wiley & Sons, New York (1979).Google Scholar
3. Zarzicki, J., Prassas, M., and Phalippou, J., J. Mat. Sc. 17, 3371–3379 (1982).Google Scholar
4. Rabinovich, E. M., Sol-Gel Technology, to be published.Google Scholar
5. Partlow, D. P. and Yoldas, B. E., J. Non-Crys. Sol., 46, 153–161 (1981).Google Scholar
6. Garvey, G. J. and Klein, L. C., J. De Physique, C9 271–274 (1982).Google Scholar
7. Fleming, J. W. and Moesle, A. H., Amer. Cer. Soc. Glass Div. Meeting, Oct. (1984).Google Scholar
8. Annual Book of ASTM Standards, 15, 372–376, (1985).Google Scholar
9. Murtagh, M. J., et al., J. Amer. Cer. Soc., 69 [11], 775–779 (1986).Google Scholar