Hostname: page-component-54dcc4c588-b5cpw Total loading time: 0 Render date: 2025-09-25T00:43:28.760Z Has data issue: false hasContentIssue false
  • English
  • Français

The Influence of Interstitial Alloying Elements on the Phase Stability and Fracture Toughness of V3Au

Published online by Cambridge University Press:  28 February 2011

M. A. Kassem ,
Y. Fahmy  and
C. C. Koch
M. A. Kassem
Affiliation:
Materials Science & Engineering Department, North Carolina State University, Raleigh, North Carolina 27695
Y. Fahmy
Affiliation:
Materials Science & Engineering Department, North Carolina State University, Raleigh, North Carolina 27695
C. C. Koch
Affiliation:
Materials Science & Engineering Department, North Carolina State University, Raleigh, North Carolina 27695
Get access

Abstract

Additions of the interstitial elements oxygen and carbon to the A15 structure V3Au intermetallic compound resulted in the formation of the L'2 perovskite structure. The composition of the L'12 phase is about 17.5 at.% oxygen. Analysis of x-ray diffraction line intensities indicated that the interstitial stabilized phase was L'12 perovskite structure rather than the L12, Cu3Au structure type. The microhardness of the L'12 phase is about 20% lower than that of the A15 phase and its fracture toughness is 2 to 3.5 times greater. The mechanism for the improved fracture toughness in the L'12 phase is the subject of continued research.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 186: Symposium I – Alloy Phase Stability and Design , 1990 , 369
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1. W. Hume-Rothery, Smallman, R. E., and Haworth, C. W., “The Structure of Metals and Alloys,' 5th ed., Institute of Metals, London, 1969, pp. 260–272; H. J. Goldschmidt, “Interstitial Alloys,” Plenum Press, New York, 1967.Google Scholar
2. Inoue, A., Kojima, Y., Minemura, T., and Masumoto, T., Metall. Trans. A, 12A, 1245–1253 (1981).Google Scholar
3. Inoue, A., Minemura, T., Kitamura, A., and Masumoto, T., Metall. Trans. A, 12A, 1041–1046, (1981).Google Scholar
4. Philipsborn, H. von and Laves, F., Acta Cryst., 17, 213–214, (1964).Google Scholar
5. Fliikiger, R., Susz, Ch., Heiniger, F., and Muller, J., J. Less common Metals, 40, 103–119, (1975).Google Scholar
6. Marion, R. H., “Use of Indentation Fracture to Determine Fracture Toughness,” Fracture Mechanics Applied to Brittle Materials, ASTM Special Technical Publication 678, Philadelphia, PA 1978, pp. 103–106.Google Scholar
7. Cullity, B. D., “Elements of X-ray Diffraction,” Addison-Wesley, Reading, MA, 1978, p. 139.Google Scholar
8. Stadelmaier, H. H., in “Developments in the Structural Chemistry of Alloy Phases,” ed. Giessen, B. C., Plenum Press, 1969, p. 141.Google Scholar
9. Pettifor, D. G., J. Phys. C 19 285–313 (1986).Google Scholar