Hostname: page-component-cb9f654ff-hn9fh Total loading time: 0 Render date: 2025-09-06T02:10:26.150Z Has data issue: false hasContentIssue false
  • English
  • Français

Interfacial Structure and Lattice Mismatch in Lamellar TiAl Alloys

Published online by Cambridge University Press:  22 February 2011

Dennis M. Dimiduk ,
Yongqian Sun  and
Peter M. Hazzledine
Dennis M. Dimiduk
Affiliation:
Wright Laboratory, Materials Directorate, Wright Patterson AFB, OH 45433
Yongqian Sun
Affiliation:
Department of Materials, University of Oxford, Oxford, 0X1 3PH, UK
Peter M. Hazzledine
Affiliation:
UES, Inc., Dayton, OH, 45432
Get access

Abstract

The gamma lamellae in TiAI alloys are rotated relative to each other approximately by multiples of 60˚ so that close packed planes and directions nearly align. However, the deviations caused by the tetragonality of the lattice are important in determining the structure of the interfaces and the internal stresses in the lamellae. These, in turn, strongly affect the mechanical properties of the alloys. In this paper two new electron optical techniques are used to quantify the deviations from pure twist boundaries (1) selected area diffraction from two adjacent twin-related lamellae permits c/a to be measured with high precision, (2) convergent beam diffraction is used to measure tilt components of lamellar boundaries and also rotations of vectors within the lamellar boundaries. The results are discussed in connection with the weak beam observations of interface dislocation structures.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 364: Symposium L – High-Temperature Ordered Intermetallic Alloys–VI , 1994 , 599
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1. Kim, Y.W., JOM 46(July), 30 (1994).Google Scholar
2. Chan, K.S. and Kim, Y.W., Acta Met. Mater., in press (1995).Google Scholar
3. Chan, K.S. and Kim, Y.W., Met. Trans. 24A, 113 (1993).Google Scholar
4. Huang, J.S. and Kim, Y.W., Scripta Met. Mater. 25, 1901 (1991).Google Scholar
5. Worth, B., PhD Thesis, University of Michigan (1993).Google Scholar
6. Kim, Y.W., Acta Met. Mater.,40, 1121 (1992).Google Scholar
7. Yamaguchi, M. and Inui, H., in ‘Structural Intermetallics’ eds Darolia, R. et al, TMS, Warrendal, PA, p. 127 (1993).Google Scholar
8 Kad, B.K., Hazzledine, P.M. and Fraser, H.L., MRS Symposium 319, 311 (1994).Google Scholar
9. Hazzledine, P.M., Kad, B.K., Fraser, H.L. and Dimiduk, D.M., MRS Symp. 273, 81 (1992).Google Scholar
10. Hazzledine, P.M., Kad, B.K. and Mendiratta, M.G., MRS Symposium 308, 725 (1993).Google Scholar
11. Kad, B.K. and Hazzledine, P.M., Philos. Mag. Letters, 66, 133 (1992).Google Scholar
12. Appel, F., Beaven, P.A. and Wagner, R., Acta Met. Mater.41, 1721 (1993).Google Scholar
13. Inui, H., Oh, M.H., Nakamura, A. and Yamaguchi, M., Acta Met. Mater. 40, 3095 (1992).Google Scholar