Hostname: page-component-cb9f654ff-c75p9 Total loading time: 0 Render date: 2025-08-05T05:09:04.264Z Has data issue: false hasContentIssue false

Liquidus Temperature Model for Hanford High-Level Waste Glasseswith High Concentrations of Zirconia

Published online by Cambridge University Press:  03 September 2012

J. V. Crum
Affiliation:
Pacific Northwest National Laboratory, Richland WA 99352
M. J. Schweiger
Affiliation:
Pacific Northwest National Laboratory, Richland WA 99352
P. Hrma
Affiliation:
Pacific Northwest National Laboratory, Richland WA 99352
J. D. Vienna
Affiliation:
Pacific Northwest National Laboratory, Richland WA 99352
Get access

Abstract

A study was conducted on glasses based on a simulated transuranic waste withhigh concentrations of ZrO2and Bi2O3 todetermine the compositional dependence of primary crystalline phases andliquidus temperature (TL). Starting from a baseline composition, glasses were formulated bychanging mass fractions of Al2O3, B2O3, Bi2O3, CeO2, Li2O, Na2O, P2O5, SiO2, and ZrO2, one at a time, while keeping theremaining components in the same relative proportions as in the baselineglass. Liquidus temperature was measured by heat treating glass samples for24 h in a uniform temperature furnace. The primary crystalline phase in thebaseline glass and the majority of the glasses was zircon(ZrSiO4). A change in the concentration of certain components (Al2O3, ZrO2, Li2O, B2O3 and SiO2) changed the primary phaseto baddeleyite (ZrO2), while cerium oxide (CeO2)precipitated from glasses with more than 3 wt% CeO2. ZirconTL was strongly increased by Al2O3, Zrb2 and CeO2, and slightly by P2O5 and SiO2; decreased strongly by Li2O and Na2O and moderately by B2O3. A first-order model was constructed for T L as a function of composition for zircon primary crystalline phaseglass.

Information

Type
Research Article
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

1. Lambert, S.L. and Kim, D.S., Tank Waste Remediation System High-Level Waste Feed Processability Assessment Report, WHC-SP-1143, Westinghouse Hanford Company, Richland, Washington, 1994.10.2172/48609Google Scholar
2. Hrma, P., Piepel, G.F., Schweiger, M.J., Smith, D.E., Kim, D.S., Redgate, P.E., Vienna, J.D., LoPresti, C.A., Simpson, D.B., Peeler, D.K., and Langowski, M.H., Property / Composition Relationships for Hanford High-Level Waste Glasses Melting at 1150°C, PNL-10359, Vol. 1 and 2. Pacific Northwest National Laboratory, Richland, Washington (1994).Google Scholar
3. Kim, D.S. and Hrma, P., Ceram. Trans. 45, 327337 (1994).Google Scholar
4. Babcock, C.L., Silicate Glass Technology Methods (John Wiley & Sons, New York, 1977) p. 225236.Google Scholar
5. Mika, M., Schweiger, M.J., Vienna, J. D., and Hrma, P., Mater. Res. Soc. Proc. (this vol.).Google Scholar
6. Li, H., Vienna, J.D., Hrma, P., Smith, D.E., and Schweiger, M.J., Mater. Res. Soc. Proc. (this vol.).Google Scholar
7. Rao, Q., Piepel, G.F., Hrma, P., and Crum, J.V., Liquidus Temperatures ofHLW Glasses with Zirconium-Containing Primary Crystalline Phases, PNNL-SA-28192, Rev. 1, Pacific Northwest National Laboratory, Richland, Washington (1996).Google Scholar
8. Hrma, P., Piepel, G.F., Redgate, P.E., Smith, D.E., Schweiger, M.J., Vienna, J.D., and Kim, D.S., Ceram. Trans. 61, 505513 (1995).Google Scholar