Hostname: page-component-54dcc4c588-gwv8j Total loading time: 0 Render date: 2025-09-12T15:29:25.783Z Has data issue: false hasContentIssue false
  • English
  • Français

Load- and Depth-Sensing Indentation Tester for Properties Measurement at Non-Ambient Temperatures

Published online by Cambridge University Press:  15 February 2011

Karl B. Yoder  and
Donald S. Stone
Karl B. Yoder
Affiliation:
Materials Science Program, University of Wisconsin-Madison, 1500 Johnson Dr., Madison, WI 53706
Donald S. Stone
Affiliation:
Department of Materials Science and Engineering, University of Wisconsin-Madison, 1509 University Avenue, Madison, WI 53706
Get access

Abstract

The ability to measure the temperature-dependence of the hardness of thin films is useful from both an applications and a scientific standpoint. For this reason, we have designed and constructed a load- and depth-sensing indentation tester combining sub-nanometer resolution with the ability to operate over a range of temperatures, currently 150K to 400K. This paper describes the new experimental apparatus and reports preliminary data on 440C stainless steel substrates with and without a 0.75 μm ZrN coating.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 308: Symposium M1 – Thin Films: Stresses and Mechanical Properties IV , 1993 , 121
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

1 Pethica, J. B., Hutchings, R., and Oliver, W. C., Phil. Mag A. , 48, 593 (1983).CrossRefGoogle Scholar
2 Doerner, M. F. and Nix, W. D., J. Mater. Res., 1, 601 (1986).CrossRefGoogle Scholar
3 Nannula, S.-P., Stone, D. S., and Li, C.-Y. in Electronic Packaging Materials Science, edited by Giess, A.E., Tu, K. N., and Kidson, J. (Mater. Res. Soc. Proc. 40, Pittsburg, PA, 1985) pp. 217–224.Google Scholar
4 Weppelmann, E. R., Field, J. S., and Swain, M. V., J. Mater. Res., 8, 830 (1993).CrossRefGoogle Scholar
5 Wu, T. W., J. Mater. Res., 6, 407 (1991).CrossRefGoogle Scholar
6 Yoder, K. B., Stone, D. S., Sproul, W. D., and Rudnik, P. J. in AdvancedEarth-to-Orbit Propulsion Technology 1992 edited by Richmond, R. J. and Wu, S. T. (NASA Conf. Publ. 3174, Vol II) pp. 317–324.Google Scholar
7 Stone, D. S., Yoder, K.B., and Sproul, W.D., J. Vac. Soc. Technol. A 9, 2543 (1991)CrossRefGoogle Scholar
8 Stone, D. S., J. Electronic Packaging, 112, 41 (1990).CrossRefGoogle Scholar
9 Yoder, K.B. and Stone, D.S., to be submitted.Google Scholar