Hostname: page-component-8448b6f56d-dnltx Total loading time: 0 Render date: 2024-04-24T16:19:19.600Z Has data issue: false hasContentIssue false

Luminescence properties of Eu3+:Y2O3 and Eu3+:Lu2O3 nanoparticles, ceramics and thin films

Published online by Cambridge University Press:  01 February 2011

Kai Zhang
Affiliation:
Center for Materials Research, Norfolk State University, 700 Park Avenue, Norfolk, VA 23504
D. Hunter
Affiliation:
Center for Materials Research, Norfolk State University, 700 Park Avenue, Norfolk, VA 23504
S. Mohanty
Affiliation:
Center for Materials Research, Norfolk State University, 700 Park Avenue, Norfolk, VA 23504
J. B. Dadson
Affiliation:
Center for Materials Research, Norfolk State University, 700 Park Avenue, Norfolk, VA 23504
Y. Barnakov
Affiliation:
Center for Materials Research, Norfolk State University, 700 Park Avenue, Norfolk, VA 23504
A. K. Pradhan
Affiliation:
Center for Materials Research, Norfolk State University, 700 Park Avenue, Norfolk, VA 23504
Get access

Abstract

Eu3+ doped Y2O3 and Lu2O3 nanocrystalline powders were synthesized via combustion technique using urea as a fuel and the metal nitrates as oxidants. The compacted nanopowders were vacuum sintered in order to form the translucent ceramics. A significant enhancement of emission characteristics was observed from the ceramics synthesized from the nanoparticles by controlling the vacuum-sintering conditions. Although the processed ceramics display superior emission characteristics, the nanocrystalline phosphor powders also display reasonably good emission characteristics. Highly epitaxial Y2O3:Eu3+ and Lu2O3:Eu3+ films were deposited on various substrates under different growth and optimization conditions using pulsed-laser deposition technique using high-density translucent ceramic target. Superior spectroscopic performance was obtained on films grown on sapphire substrates due to high-quality and epitaxial nature of the film.

Type
Research Article
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Mishra, K.C., Berkowitz, J.K., Johnson, K.H., and Schmidt, P.C., Phys. Rev. B 45, 10902 (1992).Google Scholar
2. Rop, R.C., The chemistry of artificial lighting devices: lamps, phosphors, and cathode ray tubes, (Elsevier, New-York, 1993).Google Scholar
3. Itoh, S., Kimizuka, T., and Tonegawa, T., J. Electrochem. Soc. 136, 1819 (1989).Google Scholar
4. Stewart, T.H.C., Sebastian, J.S., Trottier, T.A., Jones, S.L., and Horr, P.H., J. Vac. Sci. Technol. A 14, 1697 (1996).Google Scholar
5. Lu, J., Mura, T., Takaichi, K., Uematsu, T., Ueda, K., Yagi, H., Yanagitani, T., and Kaminskii, A.A., Jpn. J. Appl. Phys., 40, L1277 (2001).Google Scholar
6. Zych, E., Hreniak, D., and Strek, W., J. Alloys and Comp., 341, 385 (2002).Google Scholar
7. Lempicki, A., Brecher, C., Szupryczynski, P., Lingertat, H., Nagarkar, V.V., Tipnis, S.V., and Miller, S.R., Nucl. Instrum. Meth. A 488, 579 (2002).Google Scholar
8. Brecher, C., Bartram, R.H., and Lempicki, A., J. Lumines. 106, 159 (2004).Google Scholar
9. Bae, J.S., Jeong, J.H., Yi, S-S., and Park, J-C., Appl. Phys. Lett. 82, 3629 (2003).Google Scholar
10. Cho, K.G., Kumar, D., Lee, D.G., Jones, S.L., Holloways, P.H., and Singh, R.K., Appl. Phys. Lett. 71, 3335 (1997).Google Scholar