Hostname: page-component-76fb5796d-dfsvx Total loading time: 0 Render date: 2024-04-26T17:00:58.163Z Has data issue: false hasContentIssue false
  • English
  • Français

Materials Issues In Modern Reactor Safety

Published online by Cambridge University Press:  01 February 2011

D. A. Powers
D. A. Powers*
Affiliation:
Advisory Committee on Reactor Safeguards U.S. Nuclear Regulatory Commission
Get access

Abstract

Nuclear power currently supplies about 20% of the nation's electrical power needs. The nuclear power industry is going through evolutions that will lead to greater efficiency and competitiveness. Many changes in the nuclear power industry are limited by materials issues. This paper discusses a representative range of the materials issues that are arising in the industry. Materials issues are associated with prolonged use of reactor fuel, extended operation of power plants and realistic analyses of power plant safety. The issues include questions of fuel stability at high burnups, metallurgical issues of fuel cladding, embrittlement of pressure boundaries, detecting and sizing flaws in steam generators and issues of environmental qualification of reactor control and instrumentation systems. The paper concludes with a discussion of the future of nuclear power and the continuing need for better materials for power plants.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 630: Symposium GG – When Materials Matter Analyzing, Predicting, and Preventing Disasters , 2000 , GG1.5
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Meyer, R.O., McCardell, R.K., Chung, H.M., Diamond, D.J., and Scott, H.H., Nuclear Safety 37, 271 (1996).Google Scholar
2. Marshall, W., An Assessment of the Integrity of PWR Pressure Vessels, United Kingdom Atomic Energy Authority, October, 1976 Google Scholar
3. Brückner-Foit, A., Schmidt, Th., and Theodoropoulos, J., Nuclear Engineering and Design 110, 395 (1989.Google Scholar
4. Chexal, B., Horowitz, J., Jones, R., Dooley, B., Wood, C., Bouchacourt, M., Ramy, F., Nordmann, F., and Paul, P. St., Flow-Accelerated Corrosion in Power Plants, TR-106611, Electric Power Research Institute, Palo Alto, CA, no date.Google Scholar
5. M Ferng, Y., Ma, Y.P., Ma, K.T., and Chung, N.M., Corrosion 55, 332 (1999).Google Scholar
6. Tanaka, T. J., Effects of Smoke on Functional Circuits, NUREG/CR-6543, SAND97–2544, Sandia National Laboratories, Albuquerque, NM, 1997.Google Scholar