Hostname: page-component-7c8c6479df-24hb2 Total loading time: 0 Render date: 2024-03-29T00:53:24.707Z Has data issue: false hasContentIssue false

Metal induced crystallization of SiGe at 370°C for monolithically integrated MEMS applications

Published online by Cambridge University Press:  21 March 2011

Sherif Sedky
Affiliation:
IMEC, Kapeldreef 75, B3001 Leuven (Belgium) Physics Department, The American University in Cairo, P.O. Box 2511 Cairo, Egypt
Kris Baert
Affiliation:
IMEC, Kapeldreef 75, B3001 Leuven (Belgium)
Chris Van Hoof
Affiliation:
IMEC, Kapeldreef 75, B3001 Leuven (Belgium)
Yi Wang
Affiliation:
Dep. of Metallurgy and Materials Engineering Katholieke Universiteit Leuven, Leuven (Belgium) e-mail: sedky@aucegypt.edu
Omer Van Der Biest
Affiliation:
Dep. of Metallurgy and Materials Engineering Katholieke Universiteit Leuven, Leuven (Belgium) e-mail: sedky@aucegypt.edu
Ann Witvrouw
Affiliation:
IMEC, Kapeldreef 75, B3001 Leuven (Belgium)
Get access

Extract

Over the last decade SiGe has been proposed as a structural material for low thermal budget microelectromechanical systems (MEMS) that can be post-processed on top of standard CMOS driving and controlling electronics [1-6]. There are several ways to decrease the deposition temperature of SiGe and at the same time preserve the desired physical properties for MEMS as low electrical resistivity, high quality factor, economical growth rate and low mean stress and strain gradient. The conventional approach to reduce the crystallization thermal budget is to increase the germanium content to 60%, or more, using conventional Low Pressure Chemical Vapor Deposition (LPCVD) [1-3]. In this case highly conductive polycrystalline films can be realized, but the strain gradient is relatively high. This can be eliminated by furnace annealing at 450°C [2], which might introduce damage to the underlying circuits such as in the case of Cu/low k CMOS. This problem can be alleviated using excimer pulsed laser annealing [7, 8], which has been attractive for low thermal budget applications such as thin film transistors (TFT) [9], solar cells fabricated on glass substrates [10] and for monolithic integration of MEMS devices on top of standard driving electronics using SiGe as an active material [8, 11]. Also the use of hydrogenated microcrystalline SiGe allows for a low thermal budget [12]. In addition, metal induced crystallization has recently been proposed to enhance the crystallization of silicon at temperatures as low as 500°C, and the realized devices had outstanding performance compared to those employing conventional solid-phase crystallization [13]. This technique enhances crystallization by two methods. First, it has been observed that depositing SiGe on top of a thin Al or Ni layer, has a polycrystalline micro-structure close to the metal/ SiGe interface [11]. Annealing this film for a long period (is determined by the annealing temperature), results in metal diffusion and a subsequent crystallization of the film. Finally, when the metal is diffused completely through out the film, it can be etched away. The main disadvantage of this approach is that the mean stress is highly compressive and this might affect the functionality of surface micromachined structures [13].

Type
Research Article
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Franke, A. E., Heck, J. M., King, T. J. and Howe, R. T., “Polycrystalline silicon-germanium films for integrated Microsystems”, Journal of Microelectromechanical systems, 12 (2), p. 160, April, 2003.Google Scholar
2. Sedky, S., Witvrouw, A., Saerens, A., Houtte, P. Van, Poortmans, J. and Baert, K., “Effect of In-Situ Boron Doping on Properties of Silicon Germanium Films Deposited by CVD at 400°C”, Journal of Materials Research, 16 (9), pp. 2607–12, September, 2001.Google Scholar
3. Sedky, S., Witvrouw, A. and Baert, K., “Poly SiGe, a Promising Material for MEMS Monolithic Integration with the Driving Electronics”, Sensors and Actuators A, 97–98C, pp. 496504, (2002).Google Scholar
4. Sedky, S., Witvrouw, A., Caymax, M., Saerens, A. and Houtte, P. Van, “Characterization of RPCVD Polycrystalline Silicon Germanium Deposited at Temperatures ≤ 550°C”, Journal of Materials Research, Vol. 17 (7), pp. 15801586, July, 2002.Google Scholar
5. Franke, A. E., Jia, Y., Wu, M. T., king, T. J. and Howe, R. T., “Post-CMOS modular integration of poly-SiGe microstructures using poly-Ge sacrificial layers”, Solid-State Sensor and Actuator Workshop Technical Digest, pp. 1821, June 2000.Google Scholar
6. Rusu, C., Sedky, S., Parmentier, B., Verbist, A., Richard, O., Brijs, B., Geenen, L., Witvrouw, A., “New Low-Stress PECVD Poly-SiGe Layers For MEMS”, Journal of Microelectromechanical Systems (JMEMS), 12 (6), pp. 816825, December, 2003.Google Scholar
7. Sedky, S., Schroeder, J., Sands, T., Howe, R. and King, T., “Pulsed Laser Annealing of Silicon-Germanium Films”, Material Research Society symposium proceedings vol. 741, J4.1.26, Fall 2002.Google Scholar
8. Sedky, S., Howe, R., King, T., “Pulsed Laser Annealing, a Low Thermal Budget Technique for Eliminating Stress Gradient in Poly-SiGe MEMS Structures”, Journal of Microelectromechanical Systems (JMEMS), in press.Google Scholar
9. Toet, D., Smith, P. and Sigmon, T., “Laser crystallization of hydrogenated amorphous silicon thin films”, J. of Appl. Phys., 85 (11), pp. 79147918 (1999).Google Scholar
10. Andra, G., Bergmann, J., Falk, F., Ose, E., “In situ diagnostics for preparation of laser crystallized silicon films on glass for solar cells”, Thin Solid Films, 337, 98100 (1999).Google Scholar
11. Lee, S. and Joo, S., “Low temperature poly Si thin film transistor fabricated by metal induced lateral crystallization”, IEEE Electron Device Letters, 17, pp. 160162 (1996).Google Scholar
12. Mehta, A., Gromova, M., Rusu, C., Baert, K., Olivier, R., Hoof, C. Van and Witvrouw, A., ‘Novel High Growth Rate Processes for Depositing Poly-SiGe Structural Layers at CMOS Compatible Temperatures’, Proc. IEEE MEMS, p 721724 (2004).Google Scholar
13. King, T.-J., Howe, R., Sedky, S., Liu, G., Lin, B. C. -Y., Wasilik, M. and Duenn, C., “Recent Progress in Modularly Integrated MEMS Technologies”, International Electronics Device Meeting 2002, pp. 199202 (2002).Google Scholar