Hostname: page-component-8448b6f56d-jr42d Total loading time: 0 Render date: 2024-04-20T03:54:10.356Z Has data issue: false hasContentIssue false
  • English
  • Français

Microstructure, Mechanical Properties and Wear Resistance of Fe-Al Based Alloys with Various Alloying Elements

Published online by Cambridge University Press:  26 February 2011

Han-Sol Kim ,
In-Dong Yeo ,
Tae-Yeub Ra  and
Won-Yong Kim
Han-Sol Kim
Affiliation:
Advanced Materials R&D Center, Korea Institute of Industrial Technology, #994–32, Dongchun-dong, Yeonsu-ku, Incheon 406–254, South Korea
In-Dong Yeo
Affiliation:
Advanced Materials R&D Center, Korea Institute of Industrial Technology, #994–32, Dongchun-dong, Yeonsu-ku, Incheon 406–254, South Korea
Tae-Yeub Ra
Affiliation:
Advanced Materials R&D Center, Korea Institute of Industrial Technology, #994–32, Dongchun-dong, Yeonsu-ku, Incheon 406–254, South Korea
Won-Yong Kim
Affiliation:
Advanced Materials R&D Center, Korea Institute of Industrial Technology, #994–32, Dongchun-dong, Yeonsu-ku, Incheon 406–254, South Korea
Get access

Abstract

We report on microstructure, mechanical properties and wear resistance of Fe-Al based alloys with various alloying elements. The microstructures were examined using optical and scanning electron microscopy (SEM) equipped with energy dispersive X-ray spectroscope (EDS). Two types of alloys were prepared using vacuum arc melting; one is Fe-28Al based alloys (D03 structured) with and without alloying elements such as Mo and Zr. The other one is Fe-35Al based alloys (B2 structured) produced with same manner. For both types of alloys, equiaxed microstructures were observed by the addition of Mo, while dendritic structures were observed by the Zr addition. These microstructural features were more evinced with increasing the content of alloying elements. Concerning the mechanical properties and wear resistance, Fe-35Al based alloys with or without Mo addition superior to Fe-28Al based alloys especially in the high temperature region.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 842: Symposium S – Integrative and Interdisciplinary Aspects of Intermetallics , 2004 , S5.21
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. McKamey, C.G., DeVan, J.H., Tortorelli, P.E. and Sikka, V.K., J. Mater. Res. 6, 1779–1805 (1991).Google Scholar
2. Tassa, O., Testani, C., Lecoze, J. and Lefort, A., Proc. Int. Symp. Intermetallic Compounds JIMIS-6, 573–577 (1991).Google Scholar
3. Crimp, M.A. and Vedula, K., Mat. Sci. and Eng. 78, 193 (1986).Google Scholar
4. Stein, F., Sauthoff, G. and Palm, M., J. Phase Equilib. 23, 480–494 (2002).Google Scholar
5. Wasilkowska, A., Bartsch, M., Stein, F., Palm, M., Sztwiertnia, K., Sauthoff, G. and Messerschmidt, U., Mat. Sci. and Eng. A380, 9–19 (2004).Google Scholar
6. Wasilkowska, A., Bartsch, M., Stein, F., Palm, M., Sauthoff, G. and Messerschmidt, U., Mat. Sci. and Eng. A381, 1–15 (2004).Google Scholar