Hostname: page-component-76fb5796d-wq484 Total loading time: 0 Render date: 2024-04-26T06:40:40.050Z Has data issue: false hasContentIssue false
  • English
  • Français

Microstructure of an Al2O3/Metal Composite Containing an Al2O3 Filler Material

Published online by Cambridge University Press:  21 February 2011

E. Breval  and
A. S. Nagelberg
E. Breval
Affiliation:
The Pennsylvania State University, University Park, PA 16802
A. S. Nagelberg
Affiliation:
Lanxide Corporation, Tralee Industrial Park, Newark, DE 19711
Get access

Abstract

A ceramic matrix composite consisting of 100–200 μm Al2O3 grains (90 grit) embedded an Al2O3/metal matrix was examine. The matrix was produced by the directed oxidation of a molten Al alloy. The microstructure was studied by optical methods, x-ray diffraction and transmission electron microscopy (TEM) in conjunction with energy dispersive spectrometry (EDS). The matrix A12O3 was interconnected and present as ∼50–500 nm grains in ∼ 10–50 μm regions. Within these regions, the Al2O3 was separated by low angle. Al2O3/Al2O3 grain boundaries. The boundaries between regions consisted either of high angle Al2O3/Al2O3 boundaries with no grain boundary phase or of tortuous metal channels from 50 nm up to 1 μm in width. The metallic constituent within the regions was only partly interconnected, consisting of similar channels or isolated spheres of 1–500 nm. The metal consisted of Al and Si. Large fractions of the filler Al2O3 surface (∼50%) were directly bonded to the matrix Al2O3.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 132: Symposium G – Multicomponent Ultrafine Microstructures , 1988 , 93
Copyright
Copyright © Materials Research Society 1989

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Newkirk, M. S., Urquhart, A. W., Zwicker, H. R., Breval, E., J. Mater. Res. 1(1), 81–89, Jan./Feb. 1986.Google Scholar
2. Aghajanian, M. K., Macmillan, N. H., Kennedy, C. R., Luszcz, S. J., Roy, R., J. Mater. Sci. 1988 (in press).Google Scholar
3. Breval, E., Aghajanian, M., (unpublished results).Google Scholar
4. Newkirk, M. S., Lesher, H. D., White, D. R., Kennedy, C. R., Urquhart, A. W., Claar, T. D., Ceram. Eng. and Sci. Proc. 8[7–8], 879 (1987).CrossRefGoogle Scholar
5. Andersson, C. A. and Aghajanian, M. K., to be published in Ceramic Engineering and Science Proceedings.Google Scholar