Hostname: page-component-7dd5485656-zlgnt Total loading time: 0 Render date: 2025-10-30T07:22:53.597Z Has data issue: false hasContentIssue false
  • English
  • Français

Models for the Strength of Ductile Matrix Composites

Published online by Cambridge University Press:  21 February 2011

Gang Bao ,
Francesco Genna ,
John W. Hutchinson  and
Robert M. Mcmeeking
Gang Bao
Affiliation:
Department of Materials, University of California, Santa Barbara, CA 93106
Francesco Genna
Affiliation:
Departimento di Ingegneria Strutturale, Politecnico di Milano, Piazza Leonardo da Vinci 32, 20133 Milano, Italy
John W. Hutchinson
Affiliation:
Division of Applied Sciences, Harvard University, Cambridge, MA 02138
Robert M. Mcmeeking
Affiliation:
Department of Materials, University of California, Santa Barbara, CA 93106
Get access

Abstract

Numerical results have been obtained for the plastic flow of a metal matrix composite material reinforced by rigid spheres, cylinders and ellipsoids. Aligned geometries have been investigated and 2-d and 3-d cellular calculations carried out using the finite element method. The relative effect of particulates, disks and needles used as reinforcements are compared. Needles in aligned arrangements are found to produce the greatest strengthening. Additional results are presented from plane strain slip line solutions. Such results provide insight into the relative importance to strength of the reinforcement end regions versus the narrow side ligaments.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 194: Symposium R – Intermetallic Matrix Composites I , 1990 , 3
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

[1] Needleman, A., J. Appl. Mechan. 54, 525, (1987)Google Scholar
[2] Christman, T., Needleman, A. and Suresh, S., Acta Metall. 37, 3029 and corrigendum, (1989).Google Scholar
[3] Bao, G., Hutchinson, J. W., and McMeeking, R. M., ”Reinforcing Ductile Materials Against Creep and Plastic Flow by Non-Deforming Particles,” to appear in Acta Metall., 1990.Google Scholar
[4] Genna, F. and McMeeking, R. M., ”Models for the Strength of Layered Composites,” to be published (1990).Google Scholar
[5] Hom, C. L. and McMeeking, R. M., ”Plastic Flow in Ductile Materials Containing a Cubic Array of Rigid Spheres,” to appear in Int. J. Plasticity, (1990).Google Scholar
[6] Hill, R., The Mathematical Theory of Plasticity (Oxford University Press, Oxford, 1950).Google Scholar
[7] Klipfel, Y., He, M. Y., Mehrabian, R., McMeeking, R. M. and Evans, A. G., ”The Flow and Fracture of an Aluminum Matrix Composite Reinforced with Short Fibers,” to appear in Acta Metall., (1990).Google Scholar