Hostname: page-component-cb9f654ff-plnhv Total loading time: 0.001 Render date: 2025-08-29T21:31:33.396Z Has data issue: false hasContentIssue false
  • English
  • Français

Nonlinear Model Reduction Strategies for Rapid Thermal Processing Systems

Published online by Cambridge University Press:  10 February 2011

Suman Banerjee ,
J. Vernon Cole ,
Klavs F. Jensen  and
A. Emami-Naeni
Suman Banerjee
Affiliation:
Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge, MA
J. Vernon Cole
Affiliation:
Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge, MA
Klavs F. Jensen
Affiliation:
Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge, MA
A. Emami-Naeni
Affiliation:
Integrated Systems Inc., Santa Clara, CA
Get access

Abstract

This paper presents a systematic way of developing low order nonlinear models from physically- based, large scale finite element models of rapid thermal processing (RTP) systems. The low order model is extracted from transient results of the finite element model using the proper orthogonal decomposition (POD) method. Eigenfunctions obtained from the POD method are used as basis functions in spectral Galerkin expansions of partial differential equations solved by the finite element model to generate the reduced models. Simulation results demonstrate good agreement with steady state and transient data generated from the finite element model.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 429: Symposium N – Rapid Thermal and Integrated Processing V , 1996 , 57
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1. Hebb, J. P. and Jensen, K. F., ‘The Effect of Multilayer Patterns on Temperature Nonuniformity During Rapid Thermal Processing’, Journal of the Electrochemical Society, Vol.143, p. 1142 (1996).Google Scholar
2. Merchant, T. P., Modelling of Rapid Thermal Processes, Ph.D. thesis, Massachusetts Institute of Technology, 1995.Google Scholar
3. Jensen, K. F., Merchant, T. P., Cole, J. V., Hebb, J. P., Knutson, K. L. and Mihopoulos, T. G., ‘Modeling Strategies for Rapid Thermal Processing: Finite Element and Monte Carlo Methods’, Proceedings of NATO Advanced Study Institute, Advances in Rapid Thermal and Integrated Processing, ed. Roozeboom, F., Kluwer Academic Publishing, Dordrecht, The Netherlands (1996).Google Scholar
4. Sirovich, L., ‘Turbulence and the Dynamics of Coherent Structures: I, II and III’, Quarterly of Applied Mathematics, Volume XLV, Number 3, p. 561 (1987)Google Scholar
5. Wyckoff, P. S., Numerical Solution of Differential Equations through Empirical Eigenfunction Expansions, Ph.D. Thesis, Massachusetts Institute of Technology, 1995.Google Scholar