Hostname: page-component-8448b6f56d-qsmjn Total loading time: 0 Render date: 2024-04-20T03:34:31.005Z Has data issue: false hasContentIssue false
  • English
  • Français

Off-Axis Tensile Properties of γ/γ'-αMo Ds Eutectic*

Published online by Cambridge University Press:  15 February 2011

Z. Q. Hu ,
J. H. Zhang ,
Y. B. Xu ,
Z. Y. Zhang ,
Y. S. Zhang  and
Y. J. Tang
Z. Q. Hu
Affiliation:
Institute of Metal Research, The Chinese Academy of Science, Shenyang,Liaoning, China
J. H. Zhang
Affiliation:
Institute of Metal Research, The Chinese Academy of Science, Shenyang,Liaoning, China
Y. B. Xu
Affiliation:
Institute of Metal Research, The Chinese Academy of Science, Shenyang,Liaoning, China
Z. Y. Zhang
Affiliation:
Institute of Metal Research, The Chinese Academy of Science, Shenyang,Liaoning, China
Y. S. Zhang
Affiliation:
Institute of Metal Research, The Chinese Academy of Science, Shenyang,Liaoning, China
Y. J. Tang
Affiliation:
Institute of Metal Research, The Chinese Academy of Science, Shenyang,Liaoning, China
Get access

Abstract

This paper reports a study of off-axis tensile properties of γ/γ'-αMo Ds eutectic and the dynamic fracture process directly observed with a scanning electron microscope. If the loading direction deviates from the Mo fiber growth direction, the tensile strength and ductility decrease gradually. During the loading process, two types of cracking are observed: one is cracking of the fiber, and the other is delamination along the fiber-matrix interface. In plastic deformation, slip can pass through both the matrix and the fiber. As a rule, the thicker fibers are cracked earlier than the thinner ones, because they have less defects and better ductility. Delamination is the main source of final fracture.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 12: Symposium L – In Situ Composites IV , 1981 , 51
Copyright
Copyright © Materials Research Society 1982

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Footnotes

*

Z. Q. Hu is now a visiting scientist at M.I.T.

*

Z. Q. Hu is now a visiting scientist at M.I.T.

References

REFERENCES

(1) Lemkey, F. D., in “Superalloys: Metallurgy and Manufacture”, Proceedings of the Third International Symposium, (1976)321.Google Scholar
(2) Henry, M. F., Jackson, M. R., Gigliotti, M. F. X., Nelson, P. B., NASA CR-159416, Jan. (1979).Google Scholar
(3) Henry, M. F., Jackson, M. R., Walter, J. L., NASA CR-135151, Apr. (19781),Google Scholar
(4) Sprenger, H., Richter, H., Nickl, J. J., J.Mat. Sci. 11(1976)2075.Google Scholar
(5) Nakagawa, Y. G., Ohotomo, A., Saiga, Y., in “Superalloys”, Proc. of the Fourth International Symposium, (1980)267.Google Scholar
(6) Stoloff, N. S., Duquette, D. J., in “Fractography—Microscopic Cracking Processes”, ASTM STP- 600, (1975)154.Google Scholar
(7) Stoloff, N. S., in “Advances in Composite Materials”, (1978)247.Google Scholar