Hostname: page-component-76fb5796d-qxdb6 Total loading time: 0 Render date: 2024-04-29T02:09:38.844Z Has data issue: false hasContentIssue false
  • English
  • Français

On the Distribution Mechanism of Voids in Si-Implanted GaAs

Published online by Cambridge University Press:  26 February 2011

Samuel Chen ,
S.-Tong Lee ,
G. Braunstein ,
K. Y. Ko  and
T. Y. Tan
Samuel Chen
Affiliation:
Corporate Research Laboratories, Eastman Kodak Company, Rochester, NY 14650–2132
S.-Tong Lee
Affiliation:
Corporate Research Laboratories, Eastman Kodak Company, Rochester, NY 14650–2132
G. Braunstein
Affiliation:
Corporate Research Laboratories, Eastman Kodak Company, Rochester, NY 14650–2132
K. Y. Ko
Affiliation:
Corporate Research Laboratories, Eastman Kodak Company, Rochester, NY 14650–2132
T. Y. Tan
Affiliation:
School of Engineering, Duke University, Durham, NC 27706, Microelectronics Center of North Carolina, Research Triangle Park, NC 27709
Get access

Abstract

Voids, formed by the condensation of an excess of implantation-induced vacancies, have been recently identified as the defect directly responsible for dopant diffusion and electrical activation anomalies in Si-implanted and annealed GaAs and GaAs/AlGaAs superlattice materials. Depending on the implanted dose, voids can be distributed either throughout the implanted region or in two bands. We have examined the origin of this void distribution difference. In the asimplanted sample associated with the latter case, a buried continuous band of amorphous GaAs has formed. GaAs formed by the recrystallization of amorphous GaAs does not contain excess vacancies, and therefore cannot form voids. However, on either side of the amorphous layer, the excess vacancies can condense to form the observed banded distribution of voids. In the as-implanted sample associated with the former case, a continuous amorphous GaAs layer did not form and therefore, upon annealing, voids are seen throughout the implanted region.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 209: Symposium K – Defects in Materials , 1990 , 421
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Pearton, S. J., Mater. Sci. Reports, 4, 313 (1990).CrossRefGoogle Scholar
2. Bhattacharya, R. S., Rai, A. K., Yeo, Y. K., Pronko, P. P., Ling, S. C., Wilson, S. R. and Park, Y. S.: J. Appl. Phys. 54, 2329 (1983).Google Scholar
3. Evans, C. A. Jr., Deline, V. R., Sigmon, T. W. and Lidow, A., Appl. Phys. Lett. 35, 291 (1979).Google Scholar
4. Sadana, D. K., Nucl. Instrum. Meth. B 7/8, 375 (1985).Google Scholar
5. Pearton, S. J., Hull, R., Jacobson, D. C., Poate, J. M and Williams, J. S., Appl. Phys. Lett. 48, 38 (1986).Google Scholar
6. Chen, S., Lee, S.-T., Braunstein, G., and Tan, T. Y., Appl. Phys. Lett. 55, 1194 (1989).Google Scholar
7. Lee, S.-T., Chen, S., Braunstein, G., Ko, K. Y., Ott, M. L. and Tan, T. Y., Appl. Phys. Lett. 57, 389 (1990).CrossRefGoogle Scholar
8. Chen, S., Lee, S.-T., Braunstein, G., Ko, K. Y., Zheng, L. R., and Tan, T. Y., Jpn. J. Appl. Phys. (1990) in press.Google Scholar
9. Chen, S., Braunstein, G. and Lee, S.-T., Mater. Res. Symp Proc. 138, 233 (1989).Google Scholar
10. Sadana, D. K., Sands, T. and Washburn, J., Appl. Phys. Lett. 44, 623 (1984).CrossRefGoogle Scholar
11. Kahen, K. B., Peterson, D. L., Rajeswaran, G. and Lawrence, D. L., Appl. Phys. Lett. 55, 651 (1989).Google Scholar