Hostname: page-component-76fb5796d-qxdb6 Total loading time: 0 Render date: 2024-04-26T06:50:45.515Z Has data issue: false hasContentIssue false
  • English
  • Français

Parametric Optimization of a Sol-Gel Process for the Synthesis of Highly-Oriented (Pb, Ba)TiO3 Thin Films

Published online by Cambridge University Press:  11 February 2011

Wein-Duo Yang ,
Suresh C. Pillai ,
Stacey W. Boland  and
Sossina M. Haile
Wein-Duo Yang
Affiliation:
Department of Materials Science, California Institute of Technology, Pasadena, California 91125, USA
Suresh C. Pillai
Affiliation:
Department of Materials Science, California Institute of Technology, Pasadena, California 91125, USA
Stacey W. Boland
Affiliation:
Department of Materials Science, California Institute of Technology, Pasadena, California 91125, USA
Sossina M. Haile
Affiliation:
Department of Materials Science, California Institute of Technology, Pasadena, California 91125, USA
Get access

Abstract

A sol-gel process incorporating lead acetate trihydrate, barium acetate and titanium isopropoxide as precursors, acetylacetone as a chelating agent, and ethylene glycol as a solvent was used to prepare solid solution (Pb0.5,Ba0.5)TiO3. Water content, annealing temperature and heating rate were varied and the resulting effects on material properties were studied using TGA/DSC, FTIR, FESEM and X-ray diffraction. Crystallization of the perovskite structure occurred at a temperature as low as 450°C. Thin films were prepared by spin coating on (100) MgO using the optimized precursor sol. Pyrolysis and anneal temperatures were varied and the resultant film properties investigated. The pyrolysis temperature used to dry the film was found to strongly affect orientation. Under optimized conditions, highly oriented films were obtained at a crystallization temperature of 600°C.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 748: Symposium U – Ferroelectric Thin Films XI , 2002 , U12.21.6
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Burcsu, E., Ravichandran, G. and Bhattacharya, K., Appl. Phys. Lett, 77, 1698–1700 (2000).Google Scholar
2. Corriu, R. J. P. and Leclercq, D., Angew. Chem. Int. Ed. Engl., 35, 1420–1436 (1996).Google Scholar
3. Selvaraj, U., Prasad Rao, A. V. and Komerneni, S., Mater. Lett, 20, 71–74 (1994).Google Scholar
4. Nishizawa, H. and Katsube, M., J. Solid State Chem., 131, 43–48 (1997).Google Scholar
5. Giridharan, N. V. and Jayavel, R., Mater. Lett., 52, 57–61, (2002).Google Scholar
6. Brinker, C. J., and Scherer, G. W., Sol-Gel Science., Academic Press Inc., New York, (1990).Google Scholar
7. Caruso, R., de Sanctis, O., Frattini, A., Steren, C. and Gil, R., Surface and Coatings Tech., 122, 44–50 (1999).Google Scholar
8. Frey, M. H. and Payne, D. A. Chem. Mater., 7, 123–129, (1995).Google Scholar