Hostname: page-component-7c8c6479df-24hb2 Total loading time: 0 Render date: 2024-03-29T11:05:03.850Z Has data issue: false hasContentIssue false

Potentiodynamic Polarization Studies of Candidate Container Materials in Simulated Tuff Repository Environments

Published online by Cambridge University Press:  21 February 2011

John A. Beavers
Affiliation:
Cortest Columbus Incorporated 2704 Sawbury Boulevard, Columbus, OH 43235
Neil G. Thompson
Affiliation:
Cortest Columbus Incorporated 2704 Sawbury Boulevard, Columbus, OH 43235
William V. Harper
Affiliation:
Resource International 281 Enterprise Drive, Westerville, OH 43081
Get access

Abstract

Cortest Columbus is investigating the long-term performance of container materials used for high-level waste packages as part of the information needed by the Nuclear Regulatory Commission to assess the Department of Energy's application to construct a geologic repository for high-level radioactive waste. In one task of the program, a cyclic potentiodynamic polarization (CPP) technique was used to evaluate the corrosion behavior of the candidate container materials. In order to evaluate the expected range of environmental variables, a statistical experimental design approach was used. A Resolution IV experimental design for 15 variables was selected. The variables included temperature, pH, species present in the groundwater, and those generated by radiolysis. Complete matrices of CPP tests, which consist of tests in 33 environments, were performed on two candidate container materials; Type 304L Stainless Steel and Incoloy Alloy 825. In these tests, both alloys exhibited a wide range of behavior; including passive behavior, pitting and active corrosion. For each alloy, the environmental variables that affected corrosion behavior were identified.

Type
Research Article
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Beavers, J.A. and Thompson, N.G., “Environmental Effects on Corrosion in the Tuff Repository”. Topical Report of Task I of NRC Contract (NRC-04-07-009), FIN D1692 to be issued as a NUREG.Google Scholar
2. Koch, G.H., Spangler, J.M. and Thompson, N.G., The Use of Synthetic Environments For Corrosion Testing, ASTM STP 970, edited by Francis, P.E. and Lee, T.S. (American Society For Testing and Materials, Philadelphia, PA, 1988), pp 317.Google Scholar
3. ASTM G61 Standard Practice For Conducting Cyclic Potentiodynamic Polarization Measurements For Localized Corrosion, (American Society For Testing and Materials, Philadelphia, PA, 1988).Google Scholar
4.G.Box, E.P., Hunter, W.G. and Hunter, J.S., Statistics for Experimenters, (John Wiley and Sons, New York, 1978).Google Scholar
5. Knauss, K.G., Beiriger, W.J., and Peifer, D.W., Technical Report, UCRL-53630. Lawrence Livermore National Laboratory, Livermore, CA, May, 1985.Google Scholar
6. Oversby, V.M., and Knauss, K.G., Technical Report UCRL-53442, Lawrence Livermore National Laboratory, Livermore, CA, September, 1983.Google Scholar
7. Yunker, W.H., Technical Report, HEDL-7612, Westinghouse-Hanford Co., Richland, WA, June, 1986.Google Scholar
8. Glass, R.S., Overturf, G.E., McCright, R.D., and Konynenburg, R.A. Van, CA, Technical Report UCRL-92311, Lawrence Livermore National Laboratory, Livermore, CA, February, 1985.Google Scholar
9. Beavers, J.A. and Thompson, N.G. “Potentiodynamic Polarization Studies of Candidate Container Materials in Simulated Tuff Repository Environments.” Topical Report for Task 3 of NRC Contract (NRC-04-87-009), FIN D1692 to be issued as a NUREG.Google Scholar