Hostname: page-component-7c8c6479df-7qhmt Total loading time: 0 Render date: 2024-03-29T09:36:04.361Z Has data issue: false hasContentIssue false

Preparation of Cross-Sectional TEM Samples of Fe-Zn Couples

Published online by Cambridge University Press:  21 February 2011

L. A. Giannuzzi
Affiliation:
Department of Materials Science and Engineering, The Pennsylvania State University, University Park, PA 16802
P. R. Howell
Affiliation:
Department of Materials Science and Engineering, The Pennsylvania State University, University Park, PA 16802
H. W. Pickering
Affiliation:
Department of Materials Science and Engineering, The Pennsylvania State University, University Park, PA 16802
W. R. Bidter
Affiliation:
Department of Materials Science and Engineering, The Pennsylvania State University, University Park, PA 16802
Get access

Abstract

A preparation technique for the production of cross-sectional transmission electron microscope (TEM) samples from the interdiffusion regions of Fe-Zn binary couples is described. To alleviate the problem of unequal ion milling rates between the Fe and Zn, a 0.75mm thick Fe sheet has been double plated with a thick electrodeposited Zn coating to achieve a total couple thickness of ˜3mm. After slicing the couple in cross-section, the Fe region of the sample is dimpled to perforation near the Fe-Zn interface. Final thinning for TEM analysis is obtained by ion milling using a liquid nitrogen cold stage and sector speed control. The ion milling procedure is stopped when the perforated hole in the Fe-side of the couple extends through the faster eroding Zn-side of the interface. This technique, in modified form, is expected to be suitable for commercial steels coated with Zn-based alloys.

Type
Research Article
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Denner, S.G., Proceedings of the International Conference on Zinc and Zinc Alloy Coated Steel Sheet (GALVATECH), The Iron and Steel Institute of Japan, Tokyo, (1989), 101.Google Scholar
[2] Fontana, M.G., Corrosion Engineering, 3rd ed., McGraw-Hill Book Co., New York, (1986), 42.Google Scholar
[3] Kubaschewski, O., Iron-Binary Phase Diagrams, Springer-Verlag, (1982), 173.Google Scholar
[4] CRC Handbook of Chemistry and Physics, 70th ed., (19891990), D-217.Google Scholar
[5] Goodhew, P.J., “Thin Foil Preparation for Electron Microscopy”, in Practical Methods in Electron Microscopy, vol.11, ed. Glauert, A.M., Elsevier, Amsterdam, (1985), 110.Google Scholar
[6] Giannuzzi, L. A., Howell, P. R., Pickering, H. W., and Bitler, W. R., in Structure /Property Relationships for Metal/Metal Interfaces, Materials Research Society Symposium Proceedings, 229, MRS, (1991), 223.Google Scholar
[7] Giannuzzi, L. A., Howell, P. R., Pickering, H. W., and Bitler, W. R., in press, Proceedings of the ASTM STP Symposium on Metallography: 75 Years Later, Atlantic City, May 1991.Google Scholar
[8] Giannuzzi, L. A., Howell, P. R., Pickering, H. W., and Bitler, W. R., Proceedings of the American Electroplaters and Surface Finishers Society, SUR/FIN ‘91, Toronto, June (1991).Google Scholar
[9] Giannuzzi, L. A., Howell, P. R., Pickering, H. W., and Bitler, W. R., in Zinc-Based Steel Coating Systems: Metallurgy and Performance, eds. Krauss, G. and Matlock, D. K., TMS, (1990), 121.Google Scholar
[10] Giannuzzi, L. A., Howell, P. R., Pickering, H. W., and Bitler, W. R., SUR/FIN ‘90, Proceedings of the American Electroplaters and Surface Finishers Society, Boston, MA, AESF, (1990), 381.Google Scholar
[11] Giannuzzi, L. A., Howell, P. R., Pickering, H. W., and Bider, W. R., to be published in Microstructural Science, 19.Google Scholar
[12] Chen, Y.L. and Snyder, D.D., in Zinc-Based Steel Coating Systems: Metallurgy and Performance, eds. Krauss, G. and Matlock, D. K., TMS, (1990), 95.Google Scholar
[13] L'Ecuyer, L.D., Gagne, M., Cheng, C.C., and L'Esperance, G., in Electron Microscopy 1990, Proceedings of the XIIth International Congress for Electron Microscopy, eds. Peachey, L.D. and Williams, D.B., San Francisco Press, 4, (1990), 1036.Google Scholar
[14] Lin, Yuli, Pak, Suk-Wan, and Meshii, M., in Zinc-Based Steel Coating Systems: Metallurgy and Performance, eds. Krauss, G. and Matlock, D. K., TMS, (1990), 109.Google Scholar
[15] Lin, Yuli, Chiou, Wen-An and Meshii, M., Proceedings of the 49th Annual Meeting of the Electrbn Microscopy Society of America, ed. G.W. Bailey, San Francisco Press, (1991), 568.Google Scholar
[16] Drewien, C. A., Ackland, D., Marder, A.R., in Zinc-Based Steel Coating Systems: Metallurgy and Performance, eds. Krauss, G. and Matlock, D. K., TMS, (1990), 31.Google Scholar
[17] Takahashi, Akira, Miyoshi, Y., Hada, T., in Zinc-Based Steel Coating Systems: Metallurgy and Performance, eds. Krauss, G. and Matlock, D. K., TMS, (1990), 83.Google Scholar
[18] Giannuzzi, L. A., Howell, P. R., Pickering, H. W., and Bider, W. R., Proceedings of the 49th Annual Meeting of the Electron Microscopy Society of America, ed. G.W. Bailey, San Francisco Press, (1991), 1106.Google Scholar
[19] Benedict, J. P., Klepeis, S.J., Vandygraft, W.G., and Anderson, Ron, EMSA Bulletin, 19, (1989), 74.Google Scholar
[20] Benedict, J. P., Anderson, Ron, and Klepeis, S.J., in Electron Microscopy 1990, eds. Peachey, L.D. and Williams, D.B., Proceedings of the XIlth International Congress for Electron Microscopy, 4, San Francisco Press, (1990), 742.Google Scholar
[21] Bastin, G.F., Loo, F.J.J. van, and Rieck, G.D., Z. Metallkde, 68, (1977), 359.Google Scholar
[22] Bastin, G.F., Loo, F.J.J. van, and Rieck, G.D., Z. Metallkde, 65, (1974), 656.Google Scholar