Hostname: page-component-848d4c4894-75dct Total loading time: 0 Render date: 2024-05-22T00:41:51.024Z Has data issue: false hasContentIssue false

Preparation of Titanium Hexacyanoferrate Microspheres (Diameter <70 μm) by Water Extraction Variant of Sol-Gel Process and its Application to Sorption of 137Cs from Nuclear Reactor Cooling Water

Published online by Cambridge University Press:  15 February 2011

A. Deptula
Affiliation:
Institute of Nuclear Chemistry and Technology, ul. Dorodna 16, 03–195 Warsaw, Poland
A. G. Chmielewski
Affiliation:
Institute of Nuclear Chemistry and Technology, ul. Dorodna 16, 03–195 Warsaw, Poland
W. Lada
Affiliation:
Institute of Nuclear Chemistry and Technology, ul. Dorodna 16, 03–195 Warsaw, Poland
T. Olczak
Affiliation:
Institute of Nuclear Chemistry and Technology, ul. Dorodna 16, 03–195 Warsaw, Poland
Get access

Abstract

Titanium hexacyanoferrate microspheres (diameter <70km) were obtained in the following steps: (1) extraction of chlorides from an aqueous solution of TiCl4 with long chain amine -Primene JMT- in paraffin diluent (the resulting sol has the concentration 320 g TiO2/dm3 and the mole ratio Cl-: Ti4+ = 1.83); (2) blending of titania sol with an aqueous solution of K4 Fe(CN)6. 3H2O (280 g/dm3) in order to obtain final sols with Fe(CN)64-: Ti4+ mole ratio of 0.05 - 0.1; (3) formation of multicomponent sol emulsion in 2-ethylhexanol-1 containing I vol. % of Ethomen S/15 (EH), (4) gelation of emulsion drops by extraction of water with partially dehydrated EH; (5) filtration and washing with acetone; (6) drying at 140°C using a special procedure elaborated on the basis of TG and DTA studies.

The final product is insoluble in water and exhibits high sorption efficiency of 137 Cs.

Type
Research Article
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Narbutt, J., Bilewicz, A. and Gniazdowska-Laren, E., IAEA-SM-264/3 1, Vienna 1982.Google Scholar
2. Bilewicz, A. and Narbutt, J., Isotopenpraxis, 20,141 (1984).Google Scholar
3. Baran, V., Caletka, R., Tympl, M. and Urbanek, V., J.Radioanal.Chem., 24, 353 (1975).Google Scholar
4. Deptula, A., Zmijewska, W., Lada, W., Olczak, T. Bartolomeo, A. Di and Brignocchi, A., Preparation of Hydrated Antimony Pentoxide Microspheres (Diameter <40 tim) by Water Extraction Variant of Sol- gel Process and Its Application to Sorption of Sodium, presented on 8th International Workshop on Glasses and Ceramics from gels, Faro (Portugal) 18–22 September, 1995, will be published in J.of Sol-Gel Science and Technology.Google Scholar
5. Caletka, R. and Konecny, A., J.Radioanal.Chem., 30,119 (1976).Google Scholar
6. Deptula, A. and Majani, C., Sol-gel Processes and Their Aplications. ENEA Report No. RT/TIB/86/25, Roma 1986.Google Scholar
7. Deptula, A., Rebandel, J., Drozda, W., Lada, W. and Olczak, T., Production of Spherical Powders of Inorganic Compounds by Water Extraction Variant of Sol-gel Process, in Better Ceramic Through Chemistry V edited by Hampden- Smith, M.J., Klemperer, W.G. and Brinker, C.J., (Mat. Res. Soc. Symp.Proc. 270, Pittsburgh, PA, 1992) p. 277.Google Scholar
8. Deptula, A., Lada, W., Oiczak, T. and Chmielewski, A., Some Comments on the Production of Medium Sized Spherical Particles by Anion and Water Extraction Variant of Sol-Gel Process, In Hollow and Solid Spheres and Microspheres -Science and Technology Associated With Their Fabrication and Application, (Mat.Res.Soc.Symp.Proc.Vol.372, edited by Berg, M., Bemat, T., Sr., D. L. Wilcox, Cochran, J. K. Jr. and Kellerman, D., Pittsburgh PA, 1995) p.83.Google Scholar
9. Tananev, I.V., Khimiya Ferrocyanidov, Moscow, Nauka 1971.Google Scholar
10. Lieser, K.H., Bastian, J., Hecher, A.B.H. and Hild, W., J.Inorg.Nucl.Chem., 29,815 (1976).Google Scholar