Hostname: page-component-7dd5485656-2pp2p Total loading time: 0 Render date: 2025-10-28T18:28:46.231Z Has data issue: false hasContentIssue false
  • English
  • Français

Processing and Mechanical Properties of Laminar Al2O3-Ni3Al Composites

Published online by Cambridge University Press:  15 February 2011

J. H. Schneibel  and
K. B. Alexander
J. H. Schneibel
Affiliation:
Metals and Ceramics Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831
K. B. Alexander
Affiliation:
Metals and Ceramics Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831
Get access

Abstract

Several compositions of the intermetallic alloy Ni3Al were examined with respect to (a) their wetting of Al2O3 and (b) their energy absorption capability in Al2O3/Ni3Al laminates. Wetting is enhanced by small additions of carbon (e.g., 0.1 at. %), and bonding by additions of zirconium (e.g., 1 at. %). Chevron-notched laminate specimens were tested in three-point bending to assess the energy absorption due to the presence of a thin layer of Ni3Al. A nickel aluminide with the composition Ni-22Al-lZr-0.1C-0.1B was found to have a reasonable combination of wetting, adhesion and energy absorption. Interfacial bonding was found to be weak in all laminates.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 350: Symposium U – Intermetallic Matrix Composites III , 1994 , 255
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1. Liu, C. T., Stiegler, J. O., and Froes, F. H. in Metals Handbook, Vol. 2, 10th edition, ASM International, 1990, pp. 913–942.Google Scholar
2. McKamey, C. G. and Lee, E. H., in Intermetallic Matrix Composites, Proceedings of Materials Research Society Symposium, 1990, vol. 194, pp. 163–168.Google Scholar
3. Povirk, G. L., Horton, J. A., McKamey, C. G., Tiegs, T. N., and Nutt, S. R., J. Mat. Sci. 23, 3945 (1988).Google Scholar
4. Alexander, K. B., Lin, H. T., Schneibel, J. H., and Becher, P. F., to be published in Proceedings of Symposium on Processing and Fabrication of Advanced Materials , TMS Fall Meeting, Pittsburgh, 1993.Google Scholar
5. Bannister, M. and Ashby, M. F., Acta Metall. Mater. 39, 2575 (1991).Google Scholar
6. Moorhead, A. J., United States Patent 4,596,354 (1986).Google Scholar
7. Miura, S., Mishima, Y., and Suzuki, T., Z. Metallkde. 80, 48 (1989).Google Scholar