Hostname: page-component-54dcc4c588-rz4zl Total loading time: 0 Render date: 2025-09-13T02:46:26.365Z Has data issue: false hasContentIssue false
  • English
  • Français

Processing Methyl Modified Silicate Materials for Optical Applications: A Structural Stability Study

Published online by Cambridge University Press:  10 February 2011

A. Sarkar ,
Y. Yan ,
Z. Duan ,
Y. Hoshino  and
S. Ray Chaudhuri
A. Sarkar
Affiliation:
YTC America Inc., 550 Via Alondra, Camarillo, CA 93012
Y. Yan
Affiliation:
YTC America Inc., 550 Via Alondra, Camarillo, CA 93012
Z. Duan
Affiliation:
YTC America Inc., 550 Via Alondra, Camarillo, CA 93012
Y. Hoshino
Affiliation:
YTC America Inc., 550 Via Alondra, Camarillo, CA 93012
S. Ray Chaudhuri
Affiliation:
YTC America Inc., 550 Via Alondra, Camarillo, CA 93012
Get access

Abstract

Organic laser dyes in methyl modified silicate hosts have been found to have poor photo stability. This could be caused by the instability of either the laser dyes or the host materials themselves. To get a better understanding of the chemical reactions and the relationship between the thermal stability and the microstructures of the hybrid network, the methyl modified silicate materials were investigated by TGA, DTA, 13C and 29Si solid state NMR, FTIR, and AFM as a function of processing conditions. The structural stability is found to directly relate to the reaction and processing conditions and the results will be discussed.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 435: Symposium V – Better Ceramics Through Chemistry VII , 1996 , 351
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1. Schmidt, H., Mater. Res. Soc. Symp. Proc., 32, 327(1984).Google Scholar
2. Wilkes, G. L., Orler, B. and Huang, H. H., Polymer Prepr., 26, 300(1985).Google Scholar
3. Schubert, U., Husing, N. and Lorenz, A., Chem. Mater., 7, 2010(1995) and references therein.Google Scholar
4. Haruvy, Y. and Webber, S. E., Chem. Mater. 3, 501(1991).Google Scholar
5. Capozzi, C. A. and Pye, L. D., SPIE, 1513, 320(1991).Google Scholar
6. Huruvy, Y., Heller, A. and Webber, S. E. in Supramolecular Architecture, Synthetic Control in Thin Films and Solids, ACS Symposium Series 499 (American Chemical Society, Washington, DC, 1992) p. 405.Google Scholar
7. Sheldon, A. B., Capozzi, C. A., Lana, S. L., King, T. A., Li, X. and Gall, G. J., Sol-Gel Sci. Technol., 2, 181(1994).Google Scholar
8. Rahn, M. D., King, T. A., Capozzi, C. A. and Sheldon, A. B., SPIE, 2288, 364(1994).Google Scholar
9. Chambers, R. C., Haruvy, Y. and Fox, M. A., Chem. Mater., 6, 1351(1994).Google Scholar