Hostname: page-component-76fb5796d-zzh7m Total loading time: 0 Render date: 2024-04-26T19:41:00.243Z Has data issue: false hasContentIssue false
  • English
  • Français

Processing-Property-Microstructure Relationships in Tial-Based Alloys

Published online by Cambridge University Press:  15 February 2011

M H Loretto ,
D Hu  and
A Godfrey
M H Loretto
Affiliation:
IRC in Materials for High Performance Applications, The University of Birmingham, Edgbaston, B15 2TT, UK
D Hu
Affiliation:
IRC in Materials for High Performance Applications, The University of Birmingham, Edgbaston, B15 2TT, UK
A Godfrey
Affiliation:
IRC in Materials for High Performance Applications, The University of Birmingham, Edgbaston, B15 2TT, UK
Get access

Abstract

A range of TiAl-based alloys have been produced by plasma melting either small buttons (1kg samples) or ingots (up to 50kg). Some of the ingots have been atomised. The influence of thermomechanical processing on the microstructure of these materials has been assessed using optical and electron microscopy and the room temperature mechanical properties and creep strengths determined. It has been found that either through appropriate processing and/or through alloy development, it is possible to obtain alloys with room temperature strengths up to 1000MPa. Elongations of about 1% at room temperature have been obtained for alloys with this strength and this is coupled with significant improvements in creep strength over the reference alloy, Ti-48Al-2Mn-2Nb. The influence of the difficulty of slip transfer between gamma and alpha 2 has been assessed as one of the factors limiting ductility. Regions which are low in aluminium, which are present in the atomised powders initiate fracture at very low strains. These results are discussed in terms of the factors that control the strength and fracture behaviour of TiAl-based alloys.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 460: Symposium Z – High-Temperature Ordered Intermetallic Alloys VII , 1996 , 127
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Godfrey, A., Hu, D. and Loretto, M. H. (submitted to Orlando Conference)Google Scholar
2. Liu, C.T., Maziasz, P. J., Schneibel, J. H.. (paper presented at this conference)Google Scholar
3. Hu, D. (unpublished work)Google Scholar
4. Gouma, P. I., Davey, S., Ashworth, M. A., Blenkinsop, P. A. and Loretto, M. H., (submitted for publication)Google Scholar
5. Godfrey, A., Hu, D. and Loretto, M. H. (submitted for publication)Google Scholar
6. Court, S. A., Löfvander, J. P. A., Loretto, M. H. and Fraser, H. L., Phil Mag A 61 109 (1990)Google Scholar
7. Menand, A. (private communication)Google Scholar
8. Fujiwara, T., Nakamura, A., Hosomi, M., Nishitani, S. R., Shira, Y. and Yamaguchi, M., Phil Mag 61, 591 1990.Google Scholar
9. Inui, H., Nakamura, A., Oh, M. H., and Yamaguchi, M., Acta Met and Materi, 40, 3095, 1992 Google Scholar
10. Kishida, K., Johnson, D. R., Shimada, Y., Inui, H, Shirai, Y. and Yamaguchi, M.. Gamma Titanium Aluminides, p 219 (Eds Wagner, Kim and Yamaguchi, ) The Minerals and Metals Society 1995.Google Scholar