Hostname: page-component-848d4c4894-8bljj Total loading time: 0 Render date: 2024-06-15T18:11:45.221Z Has data issue: false hasContentIssue false

The Relation between Catalytic Activity of CO Oxidation and Support Structure in Oxidation Catalysts using Gold Nanoparticles

Published online by Cambridge University Press:  01 February 2011

Shiho Nagano
Affiliation:
vov-nagano@aist.go.jp, AIST, Materials Research Institute for Sustainable Development, Anagahora Shimoshidami, Moriyama-ku, Nagoya, N/A, 463-8560, Japan
Koji Tajiri
Affiliation:
k.tajiri@aist.go.jp, AIST, Materials Research Institute for Sustainable Development, Japan
Yutaka Tai
Affiliation:
tai.y@aist.go.jp, AIST, Materials Research Institute for Sustainable Development, Japan
Get access

Abstract

Thiol-passivated gold nanoparticles were adsorbed on several kinds of support materials such as titania-coated silica aerogels and xerogels etc., and then the thiol was removed by heat treatment. The catalytic activity of the prepared composites for CO oxidation reaction was measured, and the effects of the support on the catalytic activity were investigated. Density of the supports, namely, whether aerogel supports or xerogel ones, hardly affected the catalytic activity. It was found that the catalysts having high catalytic activity could be obtained by this preparation method, even using the xerogels as the support. Calcination of the supports before adsorption of the gold nanoparticles affected the activity. The difference of the catalytic activity was observed between the composites with same gold nanoparticle size, so it was considered that the surface condition of the support materials affects the state of gold nanoparticles in composite.

Type
Research Article
Copyright
Copyright © Materials Research Society 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1) Haruta, M., Yamada, N., Kobayashi, T. and Iijima, S., J.Catal. 115, 301 (1989).Google Scholar
2) Haruta, M., Tsubota, S., Kobayashi, T., Kageyama, H., Genet, M.J. and Delmon, B., J.Catal. 144, 175 (1993).Google Scholar
3) Bond, G.C. and Thompson, D.T., Catal.Rev. 41, 319 (1999).Google Scholar
4) Boccuzzi, F., Chiorino, A., Manzoli, M., Lu, P., Akita, T., Ichikawa, S. and Haruta, M., J.Catal. 202, 256 (2001).Google Scholar
5) Tai, Y., Watanabe, M., Kaneko, K., Tanemura, S., Miki, T., Murakami, J. and Tajiri, K., Adv.Mater. 13, 1611 (2001).Google Scholar
6) Tai, Y., Murakami, J., Tajiri, K., Ohashi, F., Date, M. and Tsubota, S., Appl.Catal.A 268, 183 (2004).Google Scholar
7) Brust, M., Walker, M., Bethell, D., Schiffrin, D.J. and Whyman, R., J.Chem.Soc.Chem.Commun. 1994, 801(1994).Google Scholar