Hostname: page-component-76fb5796d-wq484 Total loading time: 0 Render date: 2024-04-27T02:29:35.965Z Has data issue: false hasContentIssue false

Sources of Self-Hardening Properties in Fly Ashes

Published online by Cambridge University Press:  25 February 2011

R. C. Joshi
Affiliation:
Department of Civil Engineering, The University of Calgary, 2500 University Drive N.W., Calgary, Alberta, Canada T2N 1N4.
D. T. Lam
Affiliation:
Department of Civil Engineering, The University of Calgary, 2500 University Drive N.W., Calgary, Alberta, Canada T2N 1N4.
Get access

Extract

Laboratory investigations of the self-hardening properties of selected subbituminous fly ashes have been conducted. Chemical analyses of the fly ashes are given in Table I. The self-hardening value of the fly ashes was determined by conducting unconfined compressive strength tests on compacted samples of the moistened ashes. Various physical and chemical tests were performed to identify the reaction products, if any, of the hardened compacted fly ash paste, and to delineate the source of self-hardening properties. Results from x-ray diffraction analyses, scanning electron microscopic examination and differential thermal analyses indicated that the hydration products include calcium silicate and aluminate hydrates, and ettringite. Chemical and physical tests conducted to evaluate pertinent fly ash properties included chemical analysis, water soluble fraction, dilute hydrochloric and hydrofluoric acid soluble fractions, heat of solution on dissolving in dilute hydrochloric acid, specific surface area, and electrical conductivity tests.

Type
Research Article
Copyright
Copyright © Materials Research Society 1987

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)