Hostname: page-component-8448b6f56d-42gr6 Total loading time: 0 Render date: 2024-04-19T22:10:52.287Z Has data issue: false hasContentIssue false
  • English
  • Français

Structure of Dislocations and Mechanical Properties of B2 Alloys

Published online by Cambridge University Press:  14 February 2012

V. Paidar  and
V. Vitek
V. Paidar
Affiliation:
Institute of Physics AS CR, Na Slovance 2, 182 21 Praha 8, Czech Republic
V. Vitek
Affiliation:
Department of Materials Science and Engineering, University of Pennsylvania, 3231 Walnut Street, Philadelphia, PA 19104, U.S.A
Get access

Abstract

Adequate mechanical properties are important for both structural and functional applications of materials. There are significant differences in mechanical behaviour of different B2 ordered alloys and these are related to the properties of superlattice dislocations. Several types of dislocations can be activated, in particular <111> and <001> dislocations gliding on {110} planes. Their mobility can vary markedly from material to material and this has a strong impact on the mechanical properties. With the aim to elucidate qualitatively the differences between different alloys crystallising in the same B2 structure we analyse possible dislocation dissociations. The model employed is based on the isotropic elasticity but includes an important characteristic of stacking-fault-like defects involved in the splittings, the deviation of their displacements away from the usually assumed ½<111> APB.

Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 1373: Symposium S4 – Advanced Structural Materials—2011 , 2012 , imrc11-1373-s4-01
Copyright
Copyright © Materials Research Society 2012

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Takasugi, T., Tsurisaki, K., Izumi, O. and Ono, S., Phil. Mag. A 61 (1990) 785.Google Scholar
2. Shindo, D., Yoshida, M., Lee, B. T., Takasugi, T. and Hiraga, K., Intermetallics 3 (1995) 167.Google Scholar
3. Wollmershauser, J. A., Neil, C. J. and Agnew, S. R., Met. Mater. Trans. A 41 (2010) 1217.Google Scholar
4. Umakoshi, Y., Yamaguchi, M., Namba, Y. and Murakami, M., Acta Metall. 24 (1976) 89.Google Scholar
5. Yamagata, T. and Yoshida, H., Mater. Sci. Eng. 12 (1973) 95.Google Scholar
6. Wu, D., Baker, I., Munroe, P. R. and George, E. P., Intermetallics 15 (2007) 103.Google Scholar
7. Vitek, V. and Paidar, V., in “Dislocations in Solids”, edited by Hirth, J. P. (North-Holland, Amsterdam, 2008) p. 439.Google Scholar
8. Rachinger, W. A. and Cottrell, A. H., Acta Metall. 4 (1956) 109.Google Scholar
9. Yoo, M. H., Takasugi, T., Hanada, S. and Izumi, O., Mater. Trans. JIM 31 (1990) 435.Google Scholar
10. Takasugi, T., Hanada, S., Yoshida, M. and Shindo, D., Phil. Mag. A 71 (1995) 347.Google Scholar
11. Parthasarathy, T. A., Rao, S. I. and Dimiduk, D. M., Phil. Mag. A 67 (1993) 643.Google Scholar
12. Farkas, D., Zhou, S. J., Vaihle, C., Mautasa, B. and Panova, J., J. Mater. Res. 12 (1997) 93.Google Scholar
13. Vailhe, C. and Farkas, D., Acta Mater. 45 (1997) 4463.Google Scholar
14. Schroll, R., Vitek, V. and Gumbsch, P., Acta Mater. 46 (1998) 903.Google Scholar
15. Vailhe, C. and Farkas, D., Phil. Mag. A 79 (1999) 921.Google Scholar
16. Paidar, V., Lin, Y.-S., Cak, M. and Vitek, V., Intermetallics 18 (2010) 1285.Google Scholar
17. Yamaguchi, M., Pope, D. P., Vitek, V. and Umakoshi, Y., Phil. Mag. A 43 (1981) 1265.Google Scholar
18. Hirth, J. P. and Lothe, J., Theory of Dislocations (Pergamon, Oxford, 1982).Google Scholar
19. Paidar, V. and Vitek, V., in “Intermetalic Compounds, Progress”, edited by Westbrook, J. H. and Fleischer, R. L. (John Wiley, Chichester, 2002) p. 437.Google Scholar