Hostname: page-component-848d4c4894-ndmmz Total loading time: 0 Render date: 2024-05-09T16:09:43.609Z Has data issue: false hasContentIssue false
  • English
  • Français

Substrate Sensitivity of the Adhesion and Material Properties of RF-PECVD Amorphous Carbon

Published online by Cambridge University Press:  10 February 2011

Shashi Paul  and
F.J Clough
Shashi Paul
Affiliation:
The Emerging Technologies Research Centre, Department of Electrical & Electronic Engineering, De Montfort University, Leicester LEI 9BH, UK, pshashi@dmu.ac.uk
F.J Clough
Affiliation:
The Emerging Technologies Research Centre, Department of Electrical & Electronic Engineering, De Montfort University, Leicester LEI 9BH, UK
Get access

Abstract

Hydrogenated amorphous carbon (a-C:H), deposited by the if-plasma enhanced chemical vapour deposition (rf-PECVD) technique, is a promising material for large area electronic and interlayer dielectric applications. The structural and electronic properties of rf-PECVD a-C:H, deposited at room temperature from CH4/He and CH4/Ar gas mixtures, are shown to be sensitive to the substrate on which the thin film is deposited. The choice of substrate (c-Si or C7059 glass), and the existence and geometrical dimensions of any metallic pattern on the substrate surface, can result in significant spatial variations in the a-C:H adhesion and material properties. The observed effects are attributed to potential variations across the metal patterned substrates which influence the ‘local’ dc self-bias. This leads to spatial variations in the growth conditions and hence material properties. For electronic device and dielectric isolation applications this effect can result in significant variations in operating performance. The nature of the substrate and any overlying metallisation pattern are therefore important considerations.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 558: Symposium B – Flat-Panel Displays and Sensors-Principles, Materials… , 1999 , 149
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Robertson, J., Adv. Phys., 35, 317, (1986).Google Scholar
[2] Egret, S., Robertson, J., Milne, W.I. and Clough, F.J., Diamond Related. Mater. 6, 879, (1997).Google Scholar
[3] Clough, F.J., Kleinsorge, B., Milne, W.I., Robertson, J., Amaratunga, G.A.J. and Roy, B.N., Electronics Letts., 32, 498, (1996).Google Scholar
[4] Sulivan, J.P., Friedmann, T.A., Apblett, C.A., Siegal, M.P., Missert, N., Lovejoy, M.L., Mirkarimi, P.B., and McCarty, K.F., MRS Symp. Proc., 381,273, (1995).Google Scholar
[5] Grill, A., Patel, V., Jahnes, C., J of the Electrochem. Soceity, 145, 1649, (1998).Google Scholar
[6] Endo, K., European Patent Application, EP 0 701 283 A2, (1995).Google Scholar
[7] Silva, S.R.P. and Amaratunga, G.A.J., Constantinou, C.P., McKenzie, D.R., Diamond Related Materials, 1, 612, (1992).Google Scholar
[8] Paul, Shashi and Clough, F.J. (to be communicated).Google Scholar
[9] Paul, Shashi and Clough, F.J., Diamond Related Materials, 7, 1734, (1998).Google Scholar
[10] Gilkes, K.W.R., Sands, H.S, Batchelder, D.N., Robertson, J., Milne, W.I., Appl. Phys. Lett., 70, 1980, (1997).Google Scholar
[11] Schwan, J., Ulrich, S., Batori, V., Ehrhardt, H. and Silva, S.R.P., J. Appl. Phys., 80, 440, (1996).Google Scholar