Hostname: page-component-8448b6f56d-cfpbc Total loading time: 0 Render date: 2024-04-18T23:34:18.084Z Has data issue: false hasContentIssue false
  • English
  • Français

Synthesis and Characterization of Photocatalytic TiO2-ZnFe2O4 Nanoparticles

Published online by Cambridge University Press:  15 February 2011

Sesha S. Srinivasan ,
Jeremy Wade  and
Elias K. Stefanakos
Sesha S. Srinivasan
Affiliation:
Clean Energy Research Center, College of Engineering, University of South Florida, Tampa, FL, 33620, U.S.A.
Jeremy Wade
Affiliation:
Clean Energy Research Center, College of Engineering, University of South Florida, Tampa, FL, 33620, U.S.A.
Elias K. Stefanakos
Affiliation:
Clean Energy Research Center, College of Engineering, University of South Florida, Tampa, FL, 33620, U.S.A.
Get access

Abstract

The wide bandgap semiconductor TiO2 has become the dominant UV-activated photocatalyst in the field of air and water detoxification because of its high stability, low cost, high oxidation potential and chemically favorable properties. The demand for visible-light activated photocatalytic systems is increasing rapidly; however, currently, the efficiency and availability of photocatalysts that can be activated effectively by the solar spectrum and particularly indoor lighting is severely limited. In this paper, a new coprecipitation/hydrolysis synthesis route is used to create a TiO2-ZnFe2O4 nanocomposite that is directed towards extending the photoresponse of TiO2 from UV to visible wavelengths (>400nm). The effect of TiO2's accelerated anatase-rutile phase transformation due to the presence of the coupled ZnFe2O4 narrow bandgap semiconductor is evaluated. The transformation's dependence on pH, calcination temperature, particle size, and ZnFe2O4 concentration has been analyzed using XRD, SEM, and UV-Visible spectrometry. The requirements for retaining the highly photoactive anatase phase present in a ZnFe2O4 nanocomposite are outlined. The visible-light activated photocatalytic activity of the TiO2-ZnFe2O4 nanocomposites have been compared to an Aldrich TiO2 reference catalyst, using a solar-simulated photoreactor for the degradation of phenol.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 876: Symposium A – Nanoporous and Nanostructured Materials for Catalysis, Sensor and Gas Separation Applications , 2005 , R5.9
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Anpo, M., Studies in Surface Science and Catalysis 130, 157 (2000).Google Scholar
2. Anpo, M., Protecting the Environment, 75 (1998).Google Scholar
3. Chengyu, W., Huamei, S., Ying, T., Tongsuo, T., and Guowu, Z., Separation and Purification Technology 132, 357 (2003).Google Scholar
4. Premkumar, J., Chemistry of Materials 16, 3980 (2004).Google Scholar
5. Mozia, S., Toaszewska, M., Kosowska, B., Brzmil, B., Morawski, A.W. and Kalucki, K., App. Catalysis B: Environmental 55, 195 (2005).Google Scholar
6. Meng, W., Li, F., Evans, D., and Dang, X., Journal of Porous Materials 11, 97 (2004).Google Scholar
7. Liu, G., Zhang, X., Xu, Y., Niu, X., Zheng, L, and Ding, X., Chemosphere 55, 1287 (2004).Google Scholar
8. Cheng, P., Li, W., Zhou, T., Jin, Y., and Gu, M., Journal of Photochemistry and Photobiology A 168, 97 (2004).Google Scholar
9. Yuan, Z., Jia, J., and Zhang, L., Materials Chemistry and Physics 73, 323 (2002).Google Scholar
10. Yuan, Z. and Zhang, L., Journal of Materials Chemistry 11, 1265 (2001).Google Scholar
11. Gennari, F. and Pasquevich, D., Journal of Materials Science 33, 1571 (1998).Google Scholar