Hostname: page-component-7dd5485656-wjfd9 Total loading time: 0 Render date: 2025-10-28T18:29:33.614Z Has data issue: false hasContentIssue false
  • English
  • Français

Synthesis and Mechanical Properties of Nano-Scale NiAl and NiAl/Al2O3 Composites

Published online by Cambridge University Press:  15 February 2011

Timothy R. Smith
Timothy R. Smith*
Affiliation:
Institute for Mechanics and Materials, University of California, San Diego, La Jolla, CA.
Get access

Abstract

This work reports on the synthesis, characterization and preliminary mechanical properties of nanocrystalline NiAl/Al2O3 composite materials. Nano-scale crystallites of NiAl were formed by high energy milling of pre-alloyed powder with and without Al2O3 under an Ar atmosphere. Consolidation of the nano-scale powders was done by sinter-forging at < 0.4 Tm in air. Characterization of the powders and consolidated microstructures and hardness data are reported.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 350: Symposium U – Intermetallic Matrix Composites III , 1994 , 219
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1. Gleiter, H., NanoStructured Materials, 1, 1 (1992).Google Scholar
2. Koch, C. C., NanoStructured Materials, 2, 109 (1993).Google Scholar
3. Schneibel, J. H., Grahle, P. and Rosler, J., Mat. Sci. & Eng., A153, 684, (1992).Google Scholar
4. Whittenberger, J. D., Arzt, E. and Luton, M. J., J. Mat. Res., 5(2), 271 (1989).Google Scholar
5. Nash, P., Ur, S. C. and Dollar, M., in (Proc. 2nd Int. Conf. Struct. Appl. Mech. Alloying, Vancouver, Canada, 1993) pp. 291–296.Google Scholar
6. Zielinski, P. A., Schulz, R., Kaliaguine, S. and Van Neste, A., J. Mat. Res., 8(11), 2985 (1993).Google Scholar
7. Cho, Y. S. and Koch, C.C., Mat. Sci. & Eng., A 141, 139 (1991).Google Scholar
8. Hayashi, K. and Kihara, H., in Sintering ‘87 Vol. 1 edited by Somiya, S., Shimada, M., Yoshimura, M. and Watanabe, R., (Elsevier Science Publishers, New York, 1987), pp. 255–260.Google Scholar
9. Noebe, R. D., Bowman, R. R. and Nathal, M. V., Int. Mat. Rev., 38, 193 (1993).Google Scholar
10. Cheng, T., NanoStructured Materials, 1, 19 (1992).Google Scholar
11. Darolia, R., Lahrman, D. and Field, R., Scripta Metall. Mater., 26, 1007, (1992).Google Scholar
12. Haubold, T., Bohn, R., Birringer, R. and Gleiter, H., Mat. Sci. & Eng., A153, 679 (1992).Google Scholar