Hostname: page-component-8448b6f56d-m8qmq Total loading time: 0 Render date: 2024-04-25T04:11:38.415Z Has data issue: false hasContentIssue false
  • English
  • Français

Synthesis of Actinide-Doped Zirconia by Plasma Calcination

Published online by Cambridge University Press:  10 February 2011

B.E. Burakov ,
K.B. Helean ,
V.A. Korolev ,
R.C. Ewing ,
E.B. Anderson ,
L.B. Shpunt  and
E.E. Strykanova
B.E. Burakov
Affiliation:
V.G. Khlopin Radium Institute, St. Petersburg, Russia
K.B. Helean
Affiliation:
Dept. of Earth & Planetary Sc., Univ. of New Mexico, Albuquerque, NM, 87131USA
V.A. Korolev
Affiliation:
V.G. Khlopin Radium Institute, St. Petersburg, Russia
R.C. Ewing
Affiliation:
Dept. of Earth & Planetary Sc., Univ. of New Mexico, Albuquerque, NM, 87131USA
E.B. Anderson
Affiliation:
V.G. Khlopin Radium Institute, St. Petersburg, Russia
L.B. Shpunt
Affiliation:
V.G. Khlopin Radium Institute, St. Petersburg, Russia
E.E. Strykanova
Affiliation:
V.G. Khlopin Radium Institute, St. Petersburg, Russia
Get access

Abstract

Zirconia containing actinides in solid solution, (Zr, An)Ox, where An = U, Pu, Am, Np, Cm is considered as a starting material for the synthesis of two durable crystalline host-phases for actinide immobilization: zircon (Zr, An)SiO4 and cubic zirconia (Zr,An)O2. The use of this starting material is necessary in order to provide for total actinide incorporation into the structures of the final phases, zircon and cubic zirconia, while avoiding the presence of unincorporated actinides. Difficulties arise when the chemically inert pure oxides, ZrO2 and AnOx are used as precursor materials. Melting techniques, which are commonly used to provide solid solution of inert oxides are not acceptable for ceramic preparation, particularly the synthesis of ceramic Pufuels. This paper presents a new approach utilizing plasma calcination. Solids containing both zirconium and actinides are calcined in a plasma. This allows the use of intermediate, stabilized actinide forms, for example, co-precipitated actinide-zirconium oxalates which have a low solubility level or a solid sol-gel precursor, such as (Zr, An)SiOx.

Calcination was completed using an induction plasma in an argon gas mredium. Two types of material were used: co-precipitated oxalates of Zr and Ce with 10 wt.% Ce and a solidified sol-gel (Zr, Ce)SiOx with 10 wt.% Ce. Weakly milled material with a particle size of 0.34 mm was dropped through the plasma at a speed of 40-60 grams per hour. The final product was examined by high resolution transmission electron microscopy (HRTEM). The calcined oxalate material consisted of aggregates of globular particles (tens to hundreds of nm) of monoclinic and tetragonal (Zr,Ce)O2. The calcined sol-gel consisted of globular particles (50 to 100s nm) of monoclinic and tetragonal (or pseudo-cubic) (Zr, Ce)O2 in an amorphous silica matrix. This paper discusses the application of plasma calcination to the immobilization of excess weapons Pu and other actinides. The plasma calcination of solid materials would be used for ceramic Pu-fuel fabrication, as well as for the final disposal in geological formations.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 506: Symposium – Scientific Basis for Nuclear Waste Management XXI , 1997 , 95
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1 Burakov, B.E., Safe Waste, 2, 19 (1993).Google Scholar
2 Anderson, E.B., Burakov, B.E. and Vasiliev, V.G., Safe Waste, 2, 29 (1993).Google Scholar
3 Ewing, R.C. and Lutze, W., Journal of Materials Research, 10(2), 243 (1995).Google Scholar
4 Ewing, R.C., Weber, W.J., and Lutze, W. in Disposal of Weapon Plutonium, edited by Merz, E.R. and Walter, C.E. (NATO Workshop, St. Petersburg, Russia, 1995) pp. 65–83.Google Scholar
5 Burakov, B.E, Anderson, E.B., Galkin, B. Ya, Starchenko, V.A., and Vassiliev, V.G. in Disposal of Weapon Plutonium, edited by Merz, E.R. and Walter, C.E. (NATO Workshop, St. Petersburg, Russia, 1995) pp. 85–89.Google Scholar
6 Burakov, B.E., Anderson, E.B., Rovsha, V.S., Ushakov, S.V., Ewing, R.C., Lutze, W. and Weber, W., Mat. Res. Soc. Symp. Proc., 412, 33 (1996).Google Scholar
7 Heimann, R.B. and Vandergraaf, T.T., Journal of Materials Science Letters, 7, 583 (1988).Google Scholar
8 Carroll, D.F., Journal of the American Ceramic Society, 46(4), 194 (1963).Google Scholar
9 Degueldre, C., Heimgartner, P., Ledergerber, G., Sasajima, N., Hojou, K., Muromura, T., Wang, L. M., Gong, W., Ewing, R.C., Mat. Res. Soc. Symp. Proc., 439, in press (1997).Google Scholar