Hostname: page-component-848d4c4894-x5gtn Total loading time: 0 Render date: 2024-05-05T20:05:58.209Z Has data issue: false hasContentIssue false
  • English
  • Français

Synthesis of LNF Nano Particles for Fuel Cell Applications

Published online by Cambridge University Press:  31 January 2011

Reza Bateni ,
Maryan Nasirpour  and
Olivera Kesler
Reza Bateni
Affiliation:
reza.bateni@utoronto.ca, University of Toronto, Department of Mechanical & Industrial Engineering, Toronto, Canada
Maryan Nasirpour
Affiliation:
mnasirpo@uwaterloo.ca, University of Toronto, Department of Mechanical & Industrial Engineering, Toronto, Canada
Olivera Kesler
Affiliation:
kesler@mie.utoronto.ca, University of Toronto, Department of Mechanical & Industrial Engineering, Toronto, Canada
Get access

Abstract

The aim of the present work is to understand the effect of different parameters such as the molar ratio of metallic ions to fuel in sol-gel solution, pH of the solution, and calcining temperature on the efficiency of the combustion synthesis technique in preparing submicron lanthanum nickel ferrite using metal nitrate-citrate/glycine mixtures. Scanning electron microscopy (SEM) coupled with energy-dispersive X-ray spectroscopy (EDS) was used to evaluate the powder morphology and elemental composition. The crystal structure of the calcined powders was evaluated by X-ray diffraction (XRD) and the thermal characteristics of the LNF precursors were examined by thermo-gravimetric analysis (TGA) in air, to identify suitable processing conditions. It was found that by increasing the molar ratio of fuel to metallic ions in the precursor solution, calcining could take place at lower temperatures. However, by increasing the molar ratio of fuel to metallic ions, the yield of the combustion process was decreased. Furthermore, the pH value of the precursor solution did not have any influence on the process efficiency over the range examined.

Keywords

sol-gelcombustion synthesis (SHS)nanoscale
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1230: Symposium MM – Ultrafast Processes in Materials Science , 2009 , 1230-MM06-08
Copyright
Copyright © Materials Research Society 2010

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Han, Min-Fang, Du, Xiaojia, Liu, Ze, ECS Transactions, 25, 1379 (2009)Google Scholar
2 Minh, N.Q. J. Am. Ceram. Soc., 76, 563 (1993).Google Scholar
3 Chiba, R. Yoshimura, F. Sakurai, Y. Solid State Ionics, 124, 281(1999)Google Scholar
4 Chiba, R. Komatsu, T. Orui, H. Taguchi, H. Nozawa, K. Arai, H. Electrochemical and Solid-State Letters, 12, B69 (2009)Google Scholar
5 Arai, H. Chiba, R. Komatsu, T. Orui, H. Sugita, S. Tabata, Y. Nozawa, K. Watanabe, K. Arakawa, M. Sato, K. Journal of Fuel Cell Science and Technology, 5, 031204–1 (2008)Google Scholar
6 Ji, Y. Liu, J. He, T. Cong, L. Wang, J. and Su, W. Journal of Alloy and Compounds, 353, 257 (2003)Google Scholar
7 Yoon, M. Y. Yoon, J. S. Song, R.H. Shin, D.R. Moon, J.W. and Hwang, H. J. ECS Transactions, 25, 1477 (2009)Google Scholar
8 Sookne, M. Harris, M. Textile Research Journal, 10, 405 (1940)Google Scholar
9 Hwang, Chyi-Ching, Wu, Tsung-Yung, Wan, Jun, Journal of Materials Science 39, 4687 (2004)Google Scholar
10 Li, Fei, Hu, Keao, Li, Jianlin, Zhang, Dong, Chen, Gang, Journal of Nuclear Materials 300, 82 (2002)Google Scholar
11 Toniolo, J.C. Lima, M.D. Takimi, A.S. Bergmann, C.P. Materials Research Bulletin 40 561 (2005)Google Scholar