Hostname: page-component-8448b6f56d-42gr6 Total loading time: 0 Render date: 2024-04-23T05:32:34.409Z Has data issue: false hasContentIssue false
  • English
  • Français

TEM Samples of Semiconductors Prepared by a Small-Angle Cleavage Technique

Published online by Cambridge University Press:  21 February 2011

J. P. McCaffrey
J. P. McCaffrey*
Affiliation:
Institute for Microstructural Sciences, National Research Council of Canada, Montreal Rd. Labs, Bldg. M-50, Ottawa, Ontario, K1A 0R6, Canada
Get access

Abstract

A small-angle cleavage technique has been developed for transmission electron microscopy (TEM) of semiconductors and related materials. In this technique, samples are prepared by back-thinning the material to a prescribed thickness, back-scribing the material at a specific angle to a standard cleavage plane, and cleaving along these scribe lines. A second cleave is made along the standard cleavage plane to intersect the first cleave, forming a thin wedge. This wedge is mounted on a grid, providing an electron transparent tip free of ion milling artifacts.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 254: Symposium W – Specimen Preparation for Transmission Electron Microscopy of Materials III , 1991 , 109
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Specimen Preparation for Transmission Electron Microscopy of Materials, edited by Bravman, John C., Anderson, Ron M., and McDonald, Michael L. (Mater. Res. Soc. Proc. 115 , Pittsburgh, PA 1988).Google Scholar
2. Specimen Preparation for Transmission Electron Microscopy of Materials II, edited by Anderson, Ron (Mater. Res. Soc. Symp. Proc. 199, Pittsburgh, PA 1990).Google Scholar
3. McCaffrey, J.P., Ultramicroscopy 38, 149 (1991).Google Scholar
4. IV3 ion mill, made by TECHNOORG-LINDA LTD. Co., H-1112 Budapest, Rako u. 11., Hungary, phone/fax: (36)-(1)-165–8910.Google Scholar
5. Michot, G., Crystal Properties & Preparation Vols. 17 & 18, (Trans Tech Publications, Switzerland, 1988), pp. 55–98.Google Scholar