Hostname: page-component-848d4c4894-ttngx Total loading time: 0 Render date: 2024-05-15T16:54:26.973Z Has data issue: false hasContentIssue false

Quantitative Determination by X-Ray Diffractometry of Calcium Sulfate and Calcium Carbonate in Airborne Dusts

Published online by Cambridge University Press:  10 January 2013

Toshihiro Nakamura
Affiliation:
Department of Industrial Chemistry, Faculty of Engineering, Meiji University, Higashimita, Tama-ku, Kawasaki, 214, Japan

Abstract

A quantitative simultaneous determination method by X-ray powder diffractometry is described for calcium sulfate and calcium carbonate in airborne dusts. In order to eliminate the mutual interference among diffraction peaks, and to avoid the presence of the hydration isomers of calcium sulfate, dust samples were heated at 350°C for 2 h. To reduce the errors due to the difference-in crystallinity between the standard materials and the samples, the synthesized calcium sulfate anhydrate (anhydrite) was heated to such an extent that the half-width of the 002,020 peak was identical with that of the anhydrite in pretreated dust samples. Standard calcium carbonate (calcite) was ground until the half-width and the orientation index of the 104 peak of calcite was identical with that of the calcite in dust samples. Linear calibration curves were obtained throughout the range of 0 ∼ 30 wt% for anhydrite and the range of 0 ∼ 10 wt% for calcite, respectively. The determination limits were 0.2 wt% for anhydrite and 0.3 wt% for calcite. Relative standard deviations were 3.4 % for 8.0 wt% of anhydrite and 1.8% for 5.4 wt% of calcite. The present method is applicable to determination of calcium sulfate and calcium carbonate in actual dust samples.

Type
Research Article
Copyright
Copyright © Cambridge University Press 1988

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Altree-Williams, S. (1977). Anal. Chem., 49, 429432.CrossRefGoogle Scholar
Fukasawa, T., Iwatsuki, M. & Kawakubo, S. (1978). Bunseki Kagaku, 7, 9095.CrossRefGoogle Scholar
Fukasawa, T., Iwatsuki, M., Kawakubo, S. & Miyazaki, K. (1980) Anal. Chem., 52, 17841787.CrossRefGoogle Scholar
Henslee, W. W. & Guerra, G. E. (1977). In Adv. X-Ray Anal., ed. McMurdie, H. F., Barrett, C. S., Newkirk, J. B. & Ruud, C. O. 20, 139152. New York: Plenum.Google Scholar
Itoh, H., Sasuga, H., Nakamura, T. & Sato, J. (1981). Anal. Chim. Acta, 128. 269272.CrossRefGoogle Scholar
Large, B.A. & Haartz, J.C. (1979). Anal. Chem., 51, 520525.Google Scholar
Nakamura, T., Taguchi, M. & Sasuga, H. (1978). Res. Rep. Fac. Eng. Meiji Univ. 35, 8997.Google Scholar
Nakamura, T., Taguchi, M. & Sasuga, H. (1980). Bunseki Kagaku, 29, 159164.CrossRefGoogle Scholar
Nakamura, T. & Sasuga, H. (1980a). Bunseki Kagaku, 29, 468471.CrossRefGoogle Scholar
Nakamura, T. & Sasuga, H. (1980b). Bunseki Kagaku, 29, 824829.CrossRefGoogle Scholar
Nakamura, T. (1987). Adv. X-ray Chem. Anal. Jap., 18, 93103.Google Scholar
NBS SRM640 (1987). Standard Reference Material 640b, Silicon Powder X-Ray Diffraction Standard (1987). Obtainable from the Natl. Bur. Std. Office of Standard Reference Materials, Gaithersburg, MD 20899. Current price will be quoted on request.Google Scholar
Oikawa, K., Iwai, T., Maruyama, H. & Murase, A. (1971). J. Jpn. Soc. Air Pollut. 6, 85.Google Scholar
Oikawa, K., Nomura, T. & Maruyama, H. (1976). Bunseki Kagaku, 25, 524528.CrossRefGoogle Scholar
Povorennykh, A.S. (1972). Crystal Chemical Classification of Minerals, Vol. 1, pp. 605606. New York: Plenum.CrossRefGoogle Scholar
Powder Diffraction File (1987). Swarthmore, PA: International Centre for Diffraction Data.Google Scholar
Taylor, M. (1978). Analyst, 103, 10091020.CrossRefGoogle Scholar
Warner, P.O., Saad, L. & Jackson, J.O. (1978) J. Air. Poll. Control Asso., 22, 887890.CrossRefGoogle Scholar