Hostname: page-component-7dd5485656-pnlb5 Total loading time: 0.001 Render date: 2025-10-30T08:58:08.444Z Has data issue: false hasContentIssue false
  • English
  • Français

CONCEPTUAL DESIGN FOR ADDITIVE MANUFACTURING: AN EXPLORATIVE STUDY

Part of: Design Support Tools

Published online by Cambridge University Press:  11 June 2020

F. Valjak ,
N. Bojčetić ,
A. Nordin  and
D. Godec
F. Valjak*
Affiliation:
University of Zagreb, Croatia
N. Bojčetić
Affiliation:
University of Zagreb, Croatia
A. Nordin
Affiliation:
Lund University, Sweden
D. Godec
Affiliation:
University of Zagreb, Croatia
*
*filip.valjak@fsb.hr

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the ‘Save PDF’ action button.

With the broader industrial application of Additive Manufacturing (AM), designers are facing new challenges in conceptual design for AM. To better understand the problematic, the authors organised a design workshop with six experts in AM. The paper presents the results of the conducted design workshop and discusses the current and future trends in research on the conceptual design for AM.

Keywords

conceptual designadditive manufacturingdesign practice

Information

Type
Article
Information
Proceedings of the Design Society: DESIGN Conference , Volume 1 , May 2020 , pp. 441 - 450
Creative Commons
Creative Common License - CCCreative Common License - BYCreative Common License - NCCreative Common License - ND
This is an Open Access article, distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives licence (http://creativecommons.org/licenses/by-nc-nd/4.0/), which permits non-commercial re-use, distribution, and reproduction in any medium, provided the original work is unaltered and is properly cited. The written permission of Cambridge University Press must be obtained for commercial re-use or in order to create a derivative work.
Copyright
The Author(s), 2020. Published by Cambridge University Press

References

Bin Maidin, S., Campbell, I. and Pei, E. (2012), “Development of a design feature database to support design for additive manufacturing”, Assembly Automation, Vol. 32 No. 3, pp. 235–244. https://doi.org/10.1108/01445151211244375CrossRefGoogle Scholar
Blösch-Paidosh, A. and Shea, K. (2017), “Design heuristics for additive manufacturing”, DS 87-5 Proceedings of the 21st International Conference on Engineering Design (ICED 17) Vol 5: Design for X, Design to X, Vancouver, Canada, August 21-25, 2017, The Design Society, Vancuver, Canada, pp. 091–100.Google Scholar
Blösch-Paidosh, A. and Shea, K. (2019), “Design Heuristics for Additive Manufacturing Validated Through a User Study”, Journal of Mechanical Design, Vol. 141 No. 4, p. 041101. https://doi.org/10.1115/1.4041051CrossRefGoogle Scholar
Borgue, O. et al. (2018), “Function modelling and constraints replacement to support design for additive manufacturing of satellite components”, DS 91: Proceedings of NordDesign 2018, Linköping, Sweden, August 14-17, 2018, The Design Society, Linköping, pp. 1–10.Google Scholar
Boyard, N. et al. (2013), “A design methodology for parts using additive manufacturing”, 6th International Conference on Advanced Research in Virtual and Rapid Prototyping, pp. 399–404.10.1201/b15961-74CrossRefGoogle Scholar
Coolican, H. (2017), Research Methods and Statistics in Psychology, Psychology Press, London. https://doi.org/10.4324/9780203769836CrossRefGoogle Scholar
Diegel, O., Nordin, A. and Motte, D. (2019), A Practical Guide to Design for Additive Manufacturing, Springer Singapore, Singapore, https://doi.org/10.1007/978-981-13-8281-9CrossRefGoogle Scholar
Fiorineschi, L., Rotini, F. and Rissone, P. (2016), “A new conceptual design approach for overcoming the flaws of functional decomposition and morphology”, Journal of Engineering Design, Vol. 27 No. 7, pp. 438–468. https://doi.org/10.1080/09544828.2016.1160275CrossRefGoogle Scholar
Gibson, I., Rosen, D. and Stucker, B. (2015), Additive Manufacturing Technologies, Springer New York, New York, NY. https://doi.org/10.1007/978-1-4939-2113-3CrossRefGoogle Scholar
Hirtz, J. et al. (2002), “A functional basis for engineering design: Reconciling and evolving previous efforts”, Research in Engineering Design, Vol. 13 No. 2, pp. 65–82. https://doi.org/10.1007/s00163-001-0008-3CrossRefGoogle Scholar
Laverne, F. et al. (2015), “Assembly Based Methods to Support Product Innovation in Design for Additive Manufacturing: An Exploratory Case Study”, Journal of Mechanical Design, Vol. 137 No. 12. https://doi.org/10.1115/1.4031589CrossRefGoogle Scholar
Lindwall, A. and Törlind, P. (2018), “Evaluating design heuristics for additive manufacturing as an explorative workshop method”, DS 92: Proceedings of the DESIGN 2018 15th International Design Conference, The Design Society, Dubrovnik, Croatia, pp. 1221–1232. https://doi.org/10.21278/idc.2018.0310CrossRefGoogle Scholar
Little, A.D. and Wood, K.L. (1997), “Functional Analysis: A Fundamental Empirical Study for Reverse Engineering, Benchmarking, and Redesign”, ASME DTM Conference, pp. 1–21.10.1115/DETC97/DTM-3879CrossRefGoogle Scholar
Pahl, G. et al. (2007), Engineering Design, Springer London, London, https://doi.org/10.1007/978-1-84628-319-2CrossRefGoogle Scholar
Pradel, P. et al. (2018), “Investigation of design for additive manufacturing in professional design practice”, Journal of Engineering Design, Vol. 29 No. 4-5, pp. 165–200. https://doi.org/10.1080/09544828.2018.1454589CrossRefGoogle Scholar
Rias, A.-L. et al. (2017), “Towards additive manufacturing of intermediate objects (AMIO) for concepts generation”, International Journal on Interactive Design and Manufacturing (IJIDeM), Vol. 11 No. 2, pp. 301–315. https://doi.org/10.1007/s12008-017-0369-0CrossRefGoogle Scholar
Seepersad, C.C. (2014), “Challenges and Opportunities in Design for Additive Manufacturing”, 3D Printing and Additive Manufacturing, Vol. 1 No. 1, pp. 10–13. https://doi.org/10.1089/3dp.2013.0006CrossRefGoogle Scholar
Seepersad, C.C. et al. (2012), “A designer's guide for dimensioning and tolerancing SLS parts”, 23rd Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2012; Austin, TX; United States; August 6-8, 2012, pp. 921–931.Google Scholar
Segonds, F. et al. (2016), “PLM and early stages collaboration in interactive design, a case study in the glass industry”, International Journal on Interactive Design and Manufacturing (IJIDeM), Vol. 10 No. 2, pp. 95–104. https://10.1007/s12008-014-0217-4 10.1007/s12008-014-0217-4CrossRefGoogle Scholar
Tomiyama, T. et al. (2009), “Design methodologies: Industrial and educational applications”, CIRP Annals, Vol. 58 No. 2, pp. 543–565. https://10.1016/j.cirp.2009.09.003 10.1016/j.cirp.2009.09.003CrossRefGoogle Scholar
Valjak, F. and Bojčetić, N. (2019), “Conception of Design Principles for Additive Manufacturing”, Proceedings of the Design Society: International Conference on Engineering Design, Vol. 1 No. 1, pp. 689–698. https://10.1017/dsi.2019.73Google Scholar
Valjak, F., Bojčetić, N. and Lukić, M. (2018), “Design for Additive Manufacturing: Mapping of product functions”, DS 92: Proceedings of the DESIGN 2018 15th International Design Conference, The Design Society, Dubrovnik, Croatia, pp. 1369–1380. https://10.21278/idc.2018.0364Google Scholar
Watschke, H. et al. (2017), “A methodical approach to support ideation for additive manufacturing in design education”, DS 87-5 Proceedings of the 21st International Conference on Engineering Design (ICED 17) Vol 5: Design for X, Design to X, Vancouver, Canada, August 21-25, 2017, The Design Society, pp. 41–50.Google Scholar
Watschke, H. et al. (2019), “A Methodical Approach to Support Conceptual Design for Multi-Material Additive Manufacturing”, Proceedings of the Design Society: International Conference on Engineering Design, Vol. 1 No. 1, pp. 659–668. https://10.1017/dsi.2019.70Google Scholar
Weiss, F., Binz, H. and Roth, D. (2016), “Conception of a design catalogue for the development of functionalities with additive manufacturing”, DS 85-2: Proceedings of NordDesign 2016, Volume 2, Trondheim, Norway, August 10-12, 2016, The Design Society, Trondheim, pp. 002–011.Google Scholar